NEW Nano HP?
Designed with ideal Size, Weight, and Power consumption (SWaP) for Unmanned Aerial Vehicles (UAVs) and containing aberration-corrected optics, an internal solid-state drive (SSD), Gigabit Ethernet interface, and choice of lenses.
Headwall Nano HP
VNIR Compare
Headwall Nano HP
Wavelength Range = 400 – 1,000 nm
Spectral Bands = 340
Spatial Pixels = 1020
Camera Technology = CMOS
Pixel Pitch = 5.86 ?m
Aperture = f/2.5
Dispersion/Pixel = 1.76 nm
Entrance Slit Width = 20 ?
Spectral FWHM = 6 nm
Frame Rate (Sustained)* = 250 Hz
ADC Bit Depth = 12 bits
Spectrograph Design = Aberration-Corrected
Digital Interface = GigE
GPS/IMU = Internally Mounted High-Performance with PPK4
Data Storage on Payload = 480 GB Solid-State
Weight (without / with LiDAR) = 1.05 kg (2.32 lbs) / 1.73 kg (3.81 lbs)
Base Dimensions (without / with LiDAR) = 132 x 102 x 73 mm (5.2 x 4.0 x 2.9 in) / 132 x 175 x 99 mm (5.2 x 6.9 x 3.9 in)
Power without LiDAR (typical) = 14.4 W
Operational Temp Range = 0 – 40 ?C / 32 – 104 ?F
Storage Temp Range = -20 – 60 ?C / -4 – 140 ?F
*250 Hz with LiDAR enabled
Quick Comparison
| Headwall Nano HP remove | Specim SWIR remove | Specim AFX10 remove | Specim FX10+ remove | Resonon Pika IR-L remove | Specim Fenix remove | |
|---|---|---|---|---|---|---|
| Name | Headwall Nano HP remove | Specim SWIR remove | Specim AFX10 remove | Specim FX10+ remove | Resonon Pika IR-L remove | Specim Fenix remove |
| Image |  |  |  |  |  |  |
| Rating | ||||||
| Content | NEW Nano HP? Designed with ideal Size, Weight, and Power consumption (SWaP) for Unmanned Aerial Vehicles (UAVs) and containing aberration-corrected optics, an internal solid-state drive (SSD), Gigabit Ethernet interface, and choice of lenses. | SWIR SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection. To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal. Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. | Specim AFX10 Specim AFX10 is a VNIR hyperspectral imaging solution with an HSI camera, a small and powerful computer and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types. | Specim FX10+ The Specim FX10+ is a high-speed line-scan hyperspectral camera optimized for applications requiring fast imaging. Its high resolution ensures accurate and detailed imaging at a rapid pace. Specim FX10+ operates in the visible and near-infrared (VNIR) region from 400 to 1000 nm. | Pika IR-L 925 - 1700 nm Lightweight Infrared The Pika IR-L is a lightweight and compact Near-Infrared (925-1,700 nm) imager. The small size and mass make it well suited for airborne applications, where it can provide invisible to the naked-eye contrast of outdoor features. For a compact, lightweight Visible light spectral range option, please see the Pika L. For a higher spectral and spatial resolution version of the Pika IR-L, please see the Pika IR-L+ imager. | Fenix FENIX is optimized for the most demanding geological, law enforcement, and environmental applications. In a single continuous image, FENIX spectral camera delivers the best hyperspectral data ever seen over VNIR, NIR, and SWIR wavelengths. FENIX offers extreme ruggedness and 75% reduction in size and weight compared to previous multi-sensor systems. The excellence in technical performance and physical size has been achieved through innovative and unique ?single optics dual spectrograph? design. |
| Description | Wavelength Range = 400 - 1,000 nm Spectral Bands = 340 Spatial Pixels = 1020 Camera Technology = CMOS Pixel Pitch = 5.86 ?m Aperture = f/2.5 Dispersion/Pixel = 1.76 nm Entrance Slit Width = 20 ? Spectral FWHM = 6 nm Frame Rate (Sustained)* = 250 Hz ADC Bit Depth = 12 bits Spectrograph Design = Aberration-Corrected Digital Interface = GigE GPS/IMU = Internally Mounted High-Performance with PPK4 Data Storage on Payload = 480 GB Solid-State Weight (without / with LiDAR) = 1.05 kg (2.32 lbs) / 1.73 kg (3.81 lbs) Base Dimensions (without / with LiDAR) = 132 x 102 x 73 mm (5.2 x 4.0 x 2.9 in) / 132 x 175 x 99 mm (5.2 x 6.9 x 3.9 in) Power without LiDAR (typical) = 14.4 W Operational Temp Range = 0 - 40 ?C / 32 - 104 ?F Storage Temp Range = -20 - 60 ?C / -4 - 140 ?F *250 Hz with LiDAR enabled | Spectral range = 1000 - 2500 nm Spectral resolution (FWHM) = 12 nm (30 ?m slit) Spectral sampling / pixel = 5.6 nm F/# = F/2.0 Slit width = 30 ?m (50 or 80 ?m optional) Effective slit length = 9.2 mmRICAL CHARACTERISTICS Sensor = Cryogenically cooled MCT detector Spatial pixels = 384 Spectral bands = 288 Pixel size = 24 x 24 ?m Detector cooling = Stirling, 25 000 h MTTF Signal-to-noise ratio = 1050:1 (at max. signal level) Camera output = 16 bit CameraLink Data cable Length = 5m Camera control = USB/RS232 Frame grabber = NI-1433 Epix grabber = E4* Frame rate = 450 fps (maximum full frame) Exposure time range = 0.1 - 20 ms Power consumption = Nominal < 50 W Input voltage = 18 - 36 VNICAL CHARACTERISTICS Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm Weight = 14 kg & approx. 5 kg Body = Anodized aluminium with mounting screwholes Lens mount = Standard C-mount Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS Storage = -20... +50 ?C Operating = +5... +40 ?C non-condensing | Spectral Range = 400 - 1000 nm Spectral sampling = 2.68 nm Spectral resolution = 5.5 nm Fore lens focal length = 15 mm Field of view = 38 deg F/# = 1.7 Spectral bands = 224 Binned by 2 Spatial pixels = 1024 Spectral binning options = 2, 4, 8 Spatial binning options = 1, 2 Multiple ROI = User-selectable Maximum frame rate = 330 fps Full frame Dynamic range = 1420 SNR = 400:1 2 spectral binning, 1 spatial binning Power input = 10-30 VDC. Use separate battery or UAV/gimbal power Power consumption = 17 W Typical Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download Storage temperature = -20 ? +50C Operating temperature = +5 ? +40C Relative humidity = 5 - 90 %. Non-condensing Drone options = Multirotor with gimbal/ Multirotor, no gimbal/ Fixed Wing UAV. Any drone with adequate payload capacity can be used. Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used Gimbal weight = 2.2 - 2.7 kg. Typical gimbal solution Operating height = 15 - 150 m. Typical, local limitations may apply GNSS/IMU = Trimble APX-15 GPS Antenna = Trimble AV 14 Internal Memory = 512GB SSD Dimensions (W x H x L) = 131 x 152 x 202 mm Weight (without gimbal) = 2.1 kg Weight (with gimbal) = 4.8 kg. Typical gimbal solution | Spectral Range = 400-1000 nm Spectral resolution (FWHM) = 15 nm, Typical mean Spectral sampling/pixel = 6.3 nm, With default binning Spectral bands = 100, With default binning Numerical aperture = 1.7, With default lens Optics magnification = 0.80 Effective pixel size = 19.9x9.97 ?m, At fore lens image plane Effective slit width = 42 ?m, At fore lens image plane Effective slit length = 10.2 mm, At fore lens image plane SNR @ max. signal = 420 : 1 Spatial samples = 1024 Bit depth = 12 Maximum frame rate = 705 FPS full range. With 2-spectral binning (Bands: Max FPS) = 1:9900/5:6500/20:2800/35:1813/70:985 Binning = 2,4,8 spectral and spatial, Default: 2 spectral x 1 spatial ROI = Freely selectable multiple bands of interest, Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI?s Pixel operability = 99.993% Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). AIE: Unified spectral calibration + corrected smile and keystone aberrations. One point NUC Sensor material = CMOS Sensor cooling = Passive Full well capacity = 90 ke- Read-out modes = IWR / ITR Optics temperature = Passive Lens mount = Custom mount Fore lens FOV options:12 deg/38 deg (default)/47 deg/51 deg/83 deg. Only the default lens is specifically designed for FX10. With other lens options, optical parameters may vary. Camera digital data output/control interface = GigE Vision Camera control protocols = GenICam, ASCII Power input = 12 V DC (+-10%) Power consumption = Max 4 W Connectors = Industrial Ethernet IP = IP52 Dimensions (L x W x H) 150 x 85 x 71 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight 1.3 kg Storage temperature = -20 ... +50?C (non-condensing) Operating temperature = +5 ? +40?C (non-condensing) Relative humidity = 5% - 95% (non-condensing) | Spectral Range (nm) = 925 - 1700 Spectral Channels = 236 Spectral Bandwidth (nm) = 3.3 Spectral Resolution - FWHM (nm) = 5.9 Spatial Pixels = 320 Max Frame Rate (fps) = 364 f/# = 1.8 Interface = GigE Dimensions (mm) = 210 x 68 x 63 Weight, w/o lens (kg) = 1.01 |
Leave a Reply