HAIP Solutions BlackBird V2 VNIR Sensor is the easiest way to take hyperspectral images on drones. It is specifically designed for the use with DJI drones from the Matrice 200 & 300 series. The worldwide first hyperspectral Plug and Play solution for drones. Ready to fly and measure. BlackBird V2 has two separate sensors. One HSI sensor and a separate RGB camera for high quality live stream on the remote controller. The hyperspectral sensor provides a native image resolution of 540×540 pixels with 100 spectral channels, continuously covering the wavelength range from 500 nm to1000 nm.
BlackBird is based on a hyperspectral line scanner, but there is no need to move the sensor during image acquisition to get a full hyperspectral data cube. The internal movement unit creates a 2D image in under 3 seconds. If needed there is also a line-scan mode, where the movement to create an image comes from the drone. These two modes can be switched directly on the remote controller. Camera control and power support works via DJIs Sky port 2.0 connector and the remote controller. Through the DJI Pilot App you get features such as remote camera trigger, RGB livestream and flight-planning support. To simplify the work even more, the first results from the camera can be viewed directly on the remote controller and, for example, the exposure can be checked. Data is stored on an external, removable USB-A data storage to minimise downtime during data transfer on the ground. Additional preprocessing on camera is possible, as the camera has a build in dedicated GPU.
Haip BlackBird V2 VNIR Sensor
VNIR Compare
Haip BlackBird V2 VNIR Sensor
Wavelength range = 500-1000 nm
Number of bands = 100
Spectral resolution = 5 nm
Spectral sampling = 5 nm
Resolution RGB = 1800 x 1800 px
Resolution Spectral = 540 x 540 px
Field of View = HSI/RGB 33?/37?
Detector = CMOS
Sensor size = 2 Megapixel
Radiometric resolution = 10 bit
Integration time (cube) < 3 seconds
Data size (raw) = 100 MB/ Data cube
Connection = DJI Skyport 2.0 connector
Operation temperature = -10 - +50?C
Protection class = IP 40
Power consumption = 13.6 V DC / 2 A
Size = 80 x 60 x 90 mm
Data storage = 1 USB-A stick (supports 256 GB)
Weight (incl. Gimbal) = 790 g
Quick Comparison
| Haip BlackBird V2 VNIR Sensor remove | HySpex Mjolnir S-620 remove | Hyspex SWIR-640 remove | Specim SWIR remove | Specim Fenix remove | Resonon Pika XC2 remove | |
|---|---|---|---|---|---|---|
| Name | Haip BlackBird V2 VNIR Sensor remove | HySpex Mjolnir S-620 remove | Hyspex SWIR-640 remove | Specim SWIR remove | Specim Fenix remove | Resonon Pika XC2 remove |
| Image |  |  |  |  |  |  |
| Rating | ||||||
| Content | HAIP Solutions BlackBird V2 VNIR Sensor is the easiest way to take hyperspectral images on drones. It is specifically designed for the use with DJI drones from the Matrice 200 & 300 series. The worldwide first hyperspectral Plug and Play solution for drones. Ready to fly and measure. BlackBird V2 has two separate sensors. One HSI sensor and a separate RGB camera for high quality live stream on the remote controller. The hyperspectral sensor provides a native image resolution of 540x540 pixels with 100 spectral channels, continuously covering the wavelength range from 500 nm to1000 nm. BlackBird is based on a hyperspectral line scanner, but there is no need to move the sensor during image acquisition to get a full hyperspectral data cube. The internal movement unit creates a 2D image in under 3 seconds. If needed there is also a line-scan mode, where the movement to create an image comes from the drone. These two modes can be switched directly on the remote controller. Camera control and power support works via DJIs Sky port 2.0 connector and the remote controller. Through the DJI Pilot App you get features such as remote camera trigger, RGB livestream and flight-planning support. To simplify the work even more, the first results from the camera can be viewed directly on the remote controller and, for example, the exposure can be checked. Data is stored on an external, removable USB-A data storage to minimise downtime during data transfer on the ground. Additional preprocessing on camera is possible, as the camera has a build in dedicated GPU. | HySpex Mjolnir S-620 The HySpex Mjolnir S-620 hyperspectral imaging system for UAVs is the SWIR version of the Mjolnir camera series. Similar to the VNIR version, it provides a unique combination of small form factor and low mass, combined with high-performance specifications and scientific grade data quality. With a weight of less than 4.5 kg and less than 50 W power consumption, HySpex Mjolnir S-620 is very well suited for a wide range of UAVs. NEO offers high-performance unmanned aerial vehicles, fully integrated with the HySpex Mjolnir S-620. The UAV is fitted with a standard battery package allowing up to 30 minutes of flight time. All HySpex Mjolnir systems can also be mounted on a tripod and rotation stage for ground use. | HySpex SWIR-640 The HySpex SWIR-640 hyperspectral camera is developed for field, laboratory, and airborne applications. HySpex SWIR-640 offers high spatial resolution by using a unique MCT sensor. The FPA is cooled to 150K using a sterling cooler, yielding low background noise, high dynamic range, and exceptional SNR levels. The camera offers an aberration-corrected optical system with high optical throughput (f/2.0), the data quality, sensitivity, and resolution is truly state of the art. A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters, with a spatial resolution of 32 ?m, to infinity for e.g. airborne remote sensing. | SWIR SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection. To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal. Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. | Fenix FENIX is optimized for the most demanding geological, law enforcement, and environmental applications. In a single continuous image, FENIX spectral camera delivers the best hyperspectral data ever seen over VNIR, NIR, and SWIR wavelengths. FENIX offers extreme ruggedness and 75% reduction in size and weight compared to previous multi-sensor systems. The excellence in technical performance and physical size has been achieved through innovative and unique ?single optics dual spectrograph? design. | Pika XC2 400 - 1000 nm High-Precision VNIR The Pika XC2 is a high-resolution hyperspectral camera that covers the Visible + Near-Infrared (VNIR) spectral range. The Pika XC2 has high spatial resolution, best in-class spectral resolution, and excellent imaging quality. Popular in VNIR laboratory applications. The Pika XC2 can be used in our laboratory, and outdoor, and airborne hyperspectral systems, as well as standalone or integrated into your system. |
| Description | Wavelength range = 500-1000 nm Number of bands = 100 Spectral resolution = 5 nm Spectral sampling = 5 nm Resolution RGB = 1800 x 1800 px Resolution Spectral = 540 x 540 px Field of View = HSI/RGB 33?/37? Detector = CMOS Sensor size = 2 Megapixel Radiometric resolution = 10 bit Integration time (cube) < 3 seconds Data size (raw) = 100 MB/ Data cube Connection = DJI Skyport 2.0 connector Operation temperature = -10 - +50?C Protection class = IP 40 Power consumption = 13.6 V DC / 2 A Size = 80 x 60 x 90 mm Data storage = 1 USB-A stick (supports 256 GB) Weight (incl. Gimbal) = 790 g | Spectral range = 970 - 2500 nm Spatial pixels = 620 Spectral channels and sampling = 300 bands @ 5.1 nm F-number = F1.9 FOV = 20? Pixel FOV across/along = 0.54/0.54 mrad Bit resolution = 16 bit Noise floor = 80 e- Dynamic range = 10000 Peak SNR (at full resolution) > 900 Max speed (at full resolution) = 170 fps Power consumption* = 50 W Dimensions (l-w-h)* = 254 - 175 - 170 mm Weight* < 4.5 kg *Includes IMU/GPS and DAU - <5 kg including standard battery | Spectral range = 960 - 2500 nm Spatial pixels = 640 Spectral channels = 360 Spectral sampling = 4.38 nm FOV* = 16? Pixel FOV across/along* = 0.44/0.44 mrad Bit resolution = 16 bit Noise floor = 80 e- Dynamic range = 7500 Peak SNR (at full resolution) > 800 Max speed (at full resolution) = 235 fps Power consumption = 10 W Dimensions (l-w-h) = 36 - 11- 15 cm Weight = 4.1 kg Camera Interface = CameraLink *Can be doubled with FOV expander | Spectral range = 1000 - 2500 nm Spectral resolution (FWHM) = 12 nm (30 ?m slit) Spectral sampling / pixel = 5.6 nm F/# = F/2.0 Slit width = 30 ?m (50 or 80 ?m optional) Effective slit length = 9.2 mmRICAL CHARACTERISTICS Sensor = Cryogenically cooled MCT detector Spatial pixels = 384 Spectral bands = 288 Pixel size = 24 x 24 ?m Detector cooling = Stirling, 25 000 h MTTF Signal-to-noise ratio = 1050:1 (at max. signal level) Camera output = 16 bit CameraLink Data cable Length = 5m Camera control = USB/RS232 Frame grabber = NI-1433 Epix grabber = E4* Frame rate = 450 fps (maximum full frame) Exposure time range = 0.1 - 20 ms Power consumption = Nominal < 50 W Input voltage = 18 - 36 VNICAL CHARACTERISTICS Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm Weight = 14 kg & approx. 5 kg Body = Anodized aluminium with mounting screwholes Lens mount = Standard C-mount Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS Storage = -20... +50 ?C Operating = +5... +40 ?C non-condensing | Spectral Range (nm) = 400 - 1000 Spectral Channels = 447 Spectral Bandwidth (nm) = 1.3 Spectral Resolution - FWHM (nm) = 1.9 Spatial Pixels = 1600 Max Frame Rate (fps) = 165 f/# = 2.4 Interface = USB 3.0 Dimensions (mm) = 265 x 106 x 75 Weight, w/o lens (kg) = 2.51 |
Leave a Reply