HAIP Solutions BlackBird V2 VNIR Sensor is the easiest way to take hyperspectral images on drones. It is specifically designed for the use with DJI drones from the Matrice 200 & 300 series. The worldwide first hyperspectral Plug and Play solution for drones. Ready to fly and measure. BlackBird V2 has two separate sensors. One HSI sensor and a separate RGB camera for high quality live stream on the remote controller. The hyperspectral sensor provides a native image resolution of 540×540 pixels with 100 spectral channels, continuously covering the wavelength range from 500 nm to1000 nm.
BlackBird is based on a hyperspectral line scanner, but there is no need to move the sensor during image acquisition to get a full hyperspectral data cube. The internal movement unit creates a 2D image in under 3 seconds. If needed there is also a line-scan mode, where the movement to create an image comes from the drone. These two modes can be switched directly on the remote controller. Camera control and power support works via DJIs Sky port 2.0 connector and the remote controller. Through the DJI Pilot App you get features such as remote camera trigger, RGB livestream and flight-planning support. To simplify the work even more, the first results from the camera can be viewed directly on the remote controller and, for example, the exposure can be checked. Data is stored on an external, removable USB-A data storage to minimise downtime during data transfer on the ground. Additional preprocessing on camera is possible, as the camera has a build in dedicated GPU.
Haip BlackBird V2 VNIR Sensor
VNIR Compare
Haip BlackBird V2 VNIR Sensor
Wavelength range = 500-1000 nm
Number of bands = 100
Spectral resolution = 5 nm
Spectral sampling = 5 nm
Resolution RGB = 1800 x 1800 px
Resolution Spectral = 540 x 540 px
Field of View = HSI/RGB 33?/37?
Detector = CMOS
Sensor size = 2 Megapixel
Radiometric resolution = 10 bit
Integration time (cube) < 3 seconds
Data size (raw) = 100 MB/ Data cube
Connection = DJI Skyport 2.0 connector
Operation temperature = -10 - +50?C
Protection class = IP 40
Power consumption = 13.6 V DC / 2 A
Size = 80 x 60 x 90 mm
Data storage = 1 USB-A stick (supports 256 GB)
Weight (incl. Gimbal) = 790 g
Quick Comparison
| Haip BlackBird V2 VNIR Sensor remove | Resonon Pika IR-L remove | Specim Fenix remove | HySpex Baldur V-1024 N remove | HySpex Mjolnir V-1240 remove | Resonon Pika IR+ remove | |
|---|---|---|---|---|---|---|
| Name | Haip BlackBird V2 VNIR Sensor remove | Resonon Pika IR-L remove | Specim Fenix remove | HySpex Baldur V-1024 N remove | HySpex Mjolnir V-1240 remove | Resonon Pika IR+ remove |
| Image |  |  |  |  |  |  |
| Rating | ||||||
| Content | HAIP Solutions BlackBird V2 VNIR Sensor is the easiest way to take hyperspectral images on drones. It is specifically designed for the use with DJI drones from the Matrice 200 & 300 series. The worldwide first hyperspectral Plug and Play solution for drones. Ready to fly and measure. BlackBird V2 has two separate sensors. One HSI sensor and a separate RGB camera for high quality live stream on the remote controller. The hyperspectral sensor provides a native image resolution of 540x540 pixels with 100 spectral channels, continuously covering the wavelength range from 500 nm to1000 nm. BlackBird is based on a hyperspectral line scanner, but there is no need to move the sensor during image acquisition to get a full hyperspectral data cube. The internal movement unit creates a 2D image in under 3 seconds. If needed there is also a line-scan mode, where the movement to create an image comes from the drone. These two modes can be switched directly on the remote controller. Camera control and power support works via DJIs Sky port 2.0 connector and the remote controller. Through the DJI Pilot App you get features such as remote camera trigger, RGB livestream and flight-planning support. To simplify the work even more, the first results from the camera can be viewed directly on the remote controller and, for example, the exposure can be checked. Data is stored on an external, removable USB-A data storage to minimise downtime during data transfer on the ground. Additional preprocessing on camera is possible, as the camera has a build in dedicated GPU. | Pika IR-L 925 - 1700 nm Lightweight Infrared The Pika IR-L is a lightweight and compact Near-Infrared (925-1,700 nm) imager. The small size and mass make it well suited for airborne applications, where it can provide invisible to the naked-eye contrast of outdoor features. For a compact, lightweight Visible light spectral range option, please see the Pika L. For a higher spectral and spatial resolution version of the Pika IR-L, please see the Pika IR-L+ imager. | Fenix FENIX is optimized for the most demanding geological, law enforcement, and environmental applications. In a single continuous image, FENIX spectral camera delivers the best hyperspectral data ever seen over VNIR, NIR, and SWIR wavelengths. FENIX offers extreme ruggedness and 75% reduction in size and weight compared to previous multi-sensor systems. The excellence in technical performance and physical size has been achieved through innovative and unique ?single optics dual spectrograph? design. | HySpex Baldur V-1024 N Baldur V-1024 N covers the full VNIR spectral range from 400-1000nm and is configurable within one octave in the same range. All Baldur cameras are Nyquist cameras giving a spectral resolution of 2 spectral bands while capturing 4 times as much light as the classic systems. To ensure that the most information per framerate is provided, the spectral resolution is kept very close to 2 bands. Additionally, the spatial resolution of Baldur V-1024 N is better than 1.7 pixels, yielding a very sharp camera. | HySpex Mjolnir V-1240 The HySpex Mjolnir V-1240 hyperspectral imaging system for UAVs provides a unique combination of small form factor and low mass, combined with high-performance specifications and scientific grade data quality. With a weight of less than 4 kg and less than 50 W power consumption, HySpex Mjolnir V-1240 is very well suited for a wide range of UAVs. The system is also compatible with several off-the-shelf gimbals. NEO offers high-performance unmanned aerial vehicles, fully integrated with the HySpex Mjolnir V-1240. The UAV is fitted with a standard battery package allowing up to 30 minutes of flight time. All HySpex Mjolnir systems can also be mounted on a tripod and rotation stage for ground use. | Pika IR+ 900 - 1700 nm High-Precision Infrared The Pika IR+ (formerly Pika NIR-640) is a high-performance hyperspectral camera that covers the Near-Infrared (NIR) spectral range. It has high spatial and spectral resolutions and is often used for infrared laboratory applications. The Pika IR+ can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. |
| Description | Wavelength range = 500-1000 nm Number of bands = 100 Spectral resolution = 5 nm Spectral sampling = 5 nm Resolution RGB = 1800 x 1800 px Resolution Spectral = 540 x 540 px Field of View = HSI/RGB 33?/37? Detector = CMOS Sensor size = 2 Megapixel Radiometric resolution = 10 bit Integration time (cube) < 3 seconds Data size (raw) = 100 MB/ Data cube Connection = DJI Skyport 2.0 connector Operation temperature = -10 - +50?C Protection class = IP 40 Power consumption = 13.6 V DC / 2 A Size = 80 x 60 x 90 mm Data storage = 1 USB-A stick (supports 256 GB) Weight (incl. Gimbal) = 790 g | Spectral Range (nm) = 925 - 1700 Spectral Channels = 236 Spectral Bandwidth (nm) = 3.3 Spectral Resolution - FWHM (nm) = 5.9 Spatial Pixels = 320 Max Frame Rate (fps) = 364 f/# = 1.8 Interface = GigE Dimensions (mm) = 210 x 68 x 63 Weight, w/o lens (kg) = 1.01 | Spectral Range = 400-800/485-960/400-1000 nm Spatial pixels = 1024 Spectral bands = 72/88/106 Max speed* = 1000/800/700 fps Spectral sampling = 5.5 nm Spectral FWHM <2 bands? Spatial FWHM < 1.7 pixels Keystone <15% of a pixel Smile <15% of band FOV = 16? / 40? Bit resolution = 12 Noise floor = 11e Peak SNR >286 Dynamic range = 2560 ROI* = 8 independent ROIs Dimensions (l-w-h) = 316 - 105 - 153 mm Camera Interface = CameraLink * Reducing the number of spectral channels with ROI will proportionally increase the max framerate | Spectral range = 400 - 1000 nm Spatial pixels = 1240 Spectral channels and sampling = 200 bands @ 3 nm F-number = F1.8 FOV = 20? Pixel FOV across/along = 0.27/0.27 mrad Bit resolution = 12 bit Noise floor = 2.3 e- Dynamic range = 4400 Peak SNR (at full resolution) > 180 Max speed (at full resolution) = 285 fps Power consumption = 50 W Dimensions (l-w-h) = 250 - 175 - 170 mm Weight < 4 kg *Includes IMU/GPS and DAU - <6.5 kg including standard battery | Spectral Range (nm) = 900 - 1700 Spectral Channels = 336 Spectral Bandwidth (nm) = 2.4 Spectral Resolution - FWHM (nm) = 5.6 Spatial Pixels = 640 Max Frame Rate (fps) = 240 f/# = 1.8 Interface = GigE Dimensions (mm) = 264 x 115 x 88 Weight, w/o lens (kg) = 2.95 |
Leave a Reply