Content | Very Compact Multispectral Cameras CMS Multispetral cameras are specially designed to allow high integration of VIS/NIR multispectral systems. These lightweight (less than 75 g) and very small footprint (56x56x22mm) cameras split the image into 8 spectral bands plus 1 B&W channel. Made by hybridization of a custom Bayer-like mosaic filter on a commercial 1.3 MPixel CMOS Sensor, they allow extracting the spectrum on each point of an image. SILIOS offers three different CMS cameras (CMS-C, CMS-V and CMS-S) to address a wide spectrum of applications. | Pika IR+
900 - 1700 nm
High-Precision Infrared
The Pika IR+ (formerly Pika NIR-640) is a high-performance hyperspectral camera that covers the Near-Infrared (NIR) spectral range. It has high spatial and spectral resolutions and is often used for infrared laboratory applications. The Pika IR+ can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. | Fenix
FENIX is optimized for the most demanding geological, law enforcement, and environmental applications. In a single continuous image, FENIX spectral camera delivers the best hyperspectral data ever seen over VNIR, NIR, and SWIR wavelengths. FENIX offers extreme ruggedness and 75% reduction in size and weight compared to previous multi-sensor systems. The excellence in technical performance and physical size has been achieved through innovative and unique ?single optics dual spectrograph? design. | HySpex Baldur V-1024 N
Baldur V-1024 N covers the full VNIR spectral range from 400-1000nm and is configurable within one octave in the same range.
All Baldur cameras are Nyquist cameras giving a spectral resolution of 2 spectral bands while capturing 4 times as much light as the classic systems. To ensure that the most information per framerate is provided, the spectral resolution is kept very close to 2 bands. Additionally, the spatial resolution of Baldur V-1024 N is better than 1.7 pixels, yielding a very sharp camera. | Specim AFX10
Specim AFX10 is a VNIR hyperspectral imaging solution with an HSI camera, a small and powerful computer and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types. | Specim FX17
Specim FX17 hyperspectral camera operates in the near-infrared region and can literally see the invisible. It can reveal the targets? chemical composition, moisture, and foreign objects that are invisible to the human eye. Specim FX17 can, for example, detect different plastic types for recycling and measure the sugar level of fruits and vegetables and the moisture percentage of baked goods. |
Description | Spectral range = 550 - 830 nm
Band width (FWHM avg) = 40 nm
Macropixel configuration = 3 x 3 (8 color bands + 1 B&W)
Array type = CMOS
Optical Interface = CS-mount (C-mount compatible with additional C-ring)
Resolution (raw picture) = 1280 (H) x 1024 (V)
Resolution (spectral pictures) = 426 (H) x 339 (V)
Pixel pitch = 5.3 ?m
Maximum frame rate = 60 Hz
Exposure time range = 10 ?s to 2 s
ADC = 10-bit
Camera control = USB 3.0/ GigE
Digital output = 10-bit USB 3.0 / 10-bit GigE
Power supply = USB 3.0 External
Dimension (W x H x L) = 56 x 56 x 22 mm / 62 x 62 x 31 mm
Weight (camera head) = 100 g/ 110 g | Spectral Range (nm) = 900 - 1700
Spectral Channels = 336
Spectral Bandwidth (nm) = 2.4
Spectral Resolution - FWHM (nm) = 5.6
Spatial Pixels = 640
Max Frame Rate (fps) = 240
f/# = 1.8
Interface = GigE
Dimensions (mm) = 264 x 115 x 88
Weight, w/o lens (kg) = 2.95 | | Spectral Range = 400-800/485-960/400-1000 nm
Spatial pixels = 1024
Spectral bands = 72/88/106
Max speed* = 1000/800/700 fps
Spectral sampling = 5.5 nm
Spectral FWHM <2 bands?
Spatial FWHM < 1.7 pixels
Keystone <15% of a pixel
Smile <15% of band
FOV = 16? / 40?
Bit resolution = 12
Noise floor = 11e
Peak SNR >286
Dynamic range = 2560
ROI* = 8 independent ROIs
Dimensions (l-w-h) = 316 - 105 - 153 mm
Camera Interface = CameraLink
* Reducing the number of spectral channels with ROI will proportionally increase the max framerate | Spectral Range = 400 - 1000 nm
Spectral sampling = 2.68 nm
Spectral resolution = 5.5 nm
Fore lens focal length = 15 mm
Field of view = 38 deg
F/# = 1.7
Spectral bands = 224 Binned by 2
Spatial pixels = 1024
Spectral binning options = 2, 4, 8
Spatial binning options = 1, 2
Multiple ROI = User-selectable
Maximum frame rate = 330 fps Full frame
Dynamic range = 1420
SNR = 400:1 2 spectral binning, 1 spatial binning
Power input = 10-30 VDC. Use separate battery or UAV/gimbal power
Power consumption = 17 W Typical
Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download
Storage temperature = -20 ? +50C
Operating temperature = +5 ? +40C
Relative humidity = 5 - 90 %. Non-condensing
Drone options = Multirotor with gimbal/ Multirotor, no gimbal/ Fixed Wing UAV. Any drone with adequate payload capacity can be used.
Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used
Gimbal weight = 2.2 - 2.7 kg. Typical gimbal solution
Operating height = 15 - 150 m. Typical, local limitations may apply
GNSS/IMU = Trimble APX-15
GPS Antenna = Trimble AV 14
Internal Memory = 512GB SSD
Dimensions (W x H x L) = 131 x 152 x 202 mm
Weight (without gimbal) = 2.1 kg
Weight (with gimbal) = 4.8 kg. Typical gimbal solution | Spectral Range = 900-1700 nm
Spectral resolution (FWHM) = 8 nm (mean)
Spectral sampling/pixel = 3.5 nm
Spectral bands = 224 With default binning
Numerical aperture = 1.7 With default lens
Optics magnification = 0.80
Effective pixel size = 18.7 ?m At fore lens image plane
Effective slit width Physical width = 42?m.
Projection on sensor = 32 ?m (M=1.3) At fore lens image plane
Effective slit length = 12.0 mm At fore lens image plane
SNR @ max. signal = 1000:1
Bit depth = 12
Maximum frame rate = 670 (FX17)/ 527 (FX17e) FPS full range
Binning = 1,2,4 spectral and spatial Default: 1 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI and the total number of rows included in the mMROI?s.
Pixel operability = 99.5%. Allowed clusters: Size 2-6 pixels: N/A/ Size 7-12 pixels: ? 6/ Size 13-19 pixels: ? 2/ Size 20-35 pixels: ? 1/ Size > 35: 0
Image corrections = Non uniformity correction/ Bad pixel replacement/ Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor material = InGaAs
Sensor cooling = TEC
Full well capacity = 1.44 Me-
Read-out modes = IWR / ITR
Optics temperature = Passive Default is 20 degrees Celsius
Lens mount = Custom mount
Fore lens FOV options = 12 deg/38 deg (default)/53 deg/66 deg/75 deg/90 deg. Only the default lens is specifically designed for FX17. With other lens options, optical parameters may vary.
Camera digital data output/control interface = GigE Vision, CameraLink
Camera control protocols = GenICam, ASCII
Power input = 12 V DC (+-10%)
Power consumption = Max 24 W
Connectors = Industrial Ethernet OR CameraLink (standard MDR 26-pin). Power - Fischer 12pin DBPLU1031Z012|130G
IP = IP52
Dimensions (L x W x H) = 150 x 75 x 85 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side.
Weight = 1.56 kg
Storage temperature = -20 ... +50 oC (non-condensing)
Operating temperature = +5 ... +40 oC (non-condensing)
Relative humidity = 5% - 95% (non-condensing) |
Reviews
There are no reviews yet.