NEW Nano HP?
Designed with ideal Size, Weight, and Power consumption (SWaP) for Unmanned Aerial Vehicles (UAVs) and containing aberration-corrected optics, an internal solid-state drive (SSD), Gigabit Ethernet interface, and choice of lenses.
Headwall Nano HP
VNIR Compare
Headwall Nano HP
Wavelength Range = 400 – 1,000 nm
Spectral Bands = 340
Spatial Pixels = 1020
Camera Technology = CMOS
Pixel Pitch = 5.86 ?m
Aperture = f/2.5
Dispersion/Pixel = 1.76 nm
Entrance Slit Width = 20 ?
Spectral FWHM = 6 nm
Frame Rate (Sustained)* = 250 Hz
ADC Bit Depth = 12 bits
Spectrograph Design = Aberration-Corrected
Digital Interface = GigE
GPS/IMU = Internally Mounted High-Performance with PPK4
Data Storage on Payload = 480 GB Solid-State
Weight (without / with LiDAR) = 1.05 kg (2.32 lbs) / 1.73 kg (3.81 lbs)
Base Dimensions (without / with LiDAR) = 132 x 102 x 73 mm (5.2 x 4.0 x 2.9 in) / 132 x 175 x 99 mm (5.2 x 6.9 x 3.9 in)
Power without LiDAR (typical) = 14.4 W
Operational Temp Range = 0 – 40 ?C / 32 – 104 ?F
Storage Temp Range = -20 – 60 ?C / -4 – 140 ?F
*250 Hz with LiDAR enabled
Quick Comparison
| Headwall Nano HP remove | HySpex VNIR-3000N remove | HySpex VNIR-1800 remove | Specim FX50 remove | Specim FX10+ remove | Specim AFX10 remove | |
|---|---|---|---|---|---|---|
| Name | Headwall Nano HP remove | HySpex VNIR-3000N remove | HySpex VNIR-1800 remove | Specim FX50 remove | Specim FX10+ remove | Specim AFX10 remove |
| Image |  |  | |  |  |  |
| Rating | ||||||
| Content | NEW Nano HP? Designed with ideal Size, Weight, and Power consumption (SWaP) for Unmanned Aerial Vehicles (UAVs) and containing aberration-corrected optics, an internal solid-state drive (SSD), Gigabit Ethernet interface, and choice of lenses. | HySpex VNIR-3000 N HySpex VNIR-3000 N is developed for field, laboratory, and airborne applications. HySpex VNIR-3000 N utilizes the same spectrograph as the other classical HySpex VNIR models. With a pixel size of 3.45?m, compared to 6. 5?m for VNIR-1800, HySpex VNIR-3000 N will have less than 1.6 pixels per FWHM of the PSF spatially and less than 1.8 bands spectrally, ensuring that narrow band features will be resolved equally for all cameras. With 3000 spatial pixels, 300 bands and a noise floor of 2.4e-, HySpex VNIR-3000N will provide outstanding SNR levels in dark environments. The camera is offered with a USB connection, allowing camera operation from any computer and reducing the cost of supplementing equipment. To visualize that the camera has a wider PSF per pixel and band relative to our normal extremely sharp cameras, we have added an N for Nyquist to the model name. | HySpex VNIR-1800 The HySpex VNIR-1800 hyperspectral camera is developed for field, laboratory, and airborne applications. HySpex VNIR-1800 utilizes a cutting edge actively cooled and stabilized scientific CMOS detector. This makes VNIR-1800 the ideal camera for high-end data acquisitions where high radiometric accuracy is required. The dynamic range of 20 000 ensures outstanding SNR levels even in darker areas of an image of highly dynamic scenes. With a max frame rate of 260 fps, combined with aberration-corrected optics and high optical throughput (f/2.5), HySpex VNIR-1800 offers a unique combination of data quality, high speed, and sensitivity. A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters with a spatial resolution of 24 ?m to infinity e.g. airborne remote sensing. | Specim FX50 Specim FX50 is the only hyperspectral camera on the market covering the full mid-wave infrared (MWIR) spectral range of 2.7 - 5.3 ?m required, for example, in black plastics sorting. Specim FX50 is a high-speed, accurate, and efficient line-scan hyperspectral camera designed specifically for industrial environments. | Specim FX10+ The Specim FX10+ is a high-speed line-scan hyperspectral camera optimized for applications requiring fast imaging. Its high resolution ensures accurate and detailed imaging at a rapid pace. Specim FX10+ operates in the visible and near-infrared (VNIR) region from 400 to 1000 nm. | Specim AFX10 Specim AFX10 is a VNIR hyperspectral imaging solution with an HSI camera, a small and powerful computer and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types. |
| Description | Wavelength Range = 400 - 1,000 nm Spectral Bands = 340 Spatial Pixels = 1020 Camera Technology = CMOS Pixel Pitch = 5.86 ?m Aperture = f/2.5 Dispersion/Pixel = 1.76 nm Entrance Slit Width = 20 ? Spectral FWHM = 6 nm Frame Rate (Sustained)* = 250 Hz ADC Bit Depth = 12 bits Spectrograph Design = Aberration-Corrected Digital Interface = GigE GPS/IMU = Internally Mounted High-Performance with PPK4 Data Storage on Payload = 480 GB Solid-State Weight (without / with LiDAR) = 1.05 kg (2.32 lbs) / 1.73 kg (3.81 lbs) Base Dimensions (without / with LiDAR) = 132 x 102 x 73 mm (5.2 x 4.0 x 2.9 in) / 132 x 175 x 99 mm (5.2 x 6.9 x 3.9 in) Power without LiDAR (typical) = 14.4 W Operational Temp Range = 0 - 40 ?C / 32 - 104 ?F Storage Temp Range = -20 - 60 ?C / -4 - 140 ?F *250 Hz with LiDAR enabled | Spectral range = 400 - 1000 nm Spatial pixels = 3000 Spectral channels = 300 Spectral sampling = 2.0 nm FOV* = 16? Pixel FOV across/along* = 0.096/0.32 mrad Bit resolution = 12 bit Noise floor = 2.37 e- Dynamic range = 11000 Peak SNR (at full resolution) > 170 Max speed (at full resolution) = 117 fps Power consumption = 30 W Dimensions (l-w-h) = 39 - 9.9- 15 cm Weight = 5.0 kg Camera Interface = USB3 *Can be doubled with FOV expander | Spectral range = 400 - 1000 nm Spatial pixels = 1800 Spectral channels = 186 Spectral sampling = 3.26 nm FOV* = 17? Pixel FOV across/along* = 0.16/0.32 mrad Bit resolution = 16 bit Noise floor = 2.4 e- Dynamic range = 20000 Peak SNR (at full resolution) > 255 Max speed (at full resolution) = 260 fps Power consumption = 30 W Dimensions (l-w-h) = 39 - 9.9 - 15 cm Weight = 5.0 kg Camera Interface = CameraLink *Can be doubled with FOV expander | Spectral Range = 2.7 - 5.3 ?m Spectral resolution (FWHM) = 35 nm Spectral sampling/pixel = 8.44 nm, Without binning Spectral bands = 154, With default binning Numerical aperture = 2.0 Optics magnification = 0.5 Effective pixel size = 30 ?m, At fore lens image plane Effective slit width = 104 ?m, At fore lens image plane Effective slit length = 19.2 mm, At fore lens image plane Dynamic Range = 1600:1 with 1.5 ms exposure time Usable dynamic range / noise Spatial samples = 640 Bit depth = 16 Maximum frame rate = 380 fps, Full image with default binning Binning = 1,2,4 spectral and spatial, Default: 2 spectral x 1 spatial ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI - not the total number of rows included in the mMROI?s. Pixel operability = Number of operable pixels >99.7%. Allowed clusters: Size 4-8 pixels: <= 12/ Size 9-12 pixels: 2/ Size 13-19 pixels: 1/ Size >19 pixels: 0 Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations Sensor material = InSb Integrated cooler = Stirling Up to 10000 hours Full well capacity = 5.1 Me- Read-out modes = IWR / ITR Optics temperature = TEC-stabilized Default is 20 degrees Celsius Lens mount = Custom mount Fore lens options = OLEM43, OLEM23, OLEM17 Field of view = 24 deg, 45 deg, 60 deg Camera digital data output/control interface = GigE Vision, Custom ethernet Camera control protocols = GenICam, JSON-RPC Power input = 24 V DC Power consumption = Max 90 W, Typical 40 W, During simultaneous cool-down of optics and detector Connectors = Ethernet/ Aux - 0306423 (09-0428-90-08) Binder 8pin/ Power - 0306627 (LF10WBR-4P) Hirose 4pin Trigger in IP = IP40 Dimensions (L x W x H) = 280 x 202 x 169 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight = 7 kg Storage temperature = -20 ... +50 oC Operating temperature = +5 ... +40 oC Relative humidity = 5% - 95% (non-condensing) | Spectral Range = 400-1000 nm Spectral resolution (FWHM) = 15 nm, Typical mean Spectral sampling/pixel = 6.3 nm, With default binning Spectral bands = 100, With default binning Numerical aperture = 1.7, With default lens Optics magnification = 0.80 Effective pixel size = 19.9x9.97 ?m, At fore lens image plane Effective slit width = 42 ?m, At fore lens image plane Effective slit length = 10.2 mm, At fore lens image plane SNR @ max. signal = 420 : 1 Spatial samples = 1024 Bit depth = 12 Maximum frame rate = 705 FPS full range. With 2-spectral binning (Bands: Max FPS) = 1:9900/5:6500/20:2800/35:1813/70:985 Binning = 2,4,8 spectral and spatial, Default: 2 spectral x 1 spatial ROI = Freely selectable multiple bands of interest, Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI?s Pixel operability = 99.993% Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). AIE: Unified spectral calibration + corrected smile and keystone aberrations. One point NUC Sensor material = CMOS Sensor cooling = Passive Full well capacity = 90 ke- Read-out modes = IWR / ITR Optics temperature = Passive Lens mount = Custom mount Fore lens FOV options:12 deg/38 deg (default)/47 deg/51 deg/83 deg. Only the default lens is specifically designed for FX10. With other lens options, optical parameters may vary. Camera digital data output/control interface = GigE Vision Camera control protocols = GenICam, ASCII Power input = 12 V DC (+-10%) Power consumption = Max 4 W Connectors = Industrial Ethernet IP = IP52 Dimensions (L x W x H) 150 x 85 x 71 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight 1.3 kg Storage temperature = -20 ... +50?C (non-condensing) Operating temperature = +5 ? +40?C (non-condensing) Relative humidity = 5% - 95% (non-condensing) | Spectral Range = 400 - 1000 nm Spectral sampling = 2.68 nm Spectral resolution = 5.5 nm Fore lens focal length = 15 mm Field of view = 38 deg F/# = 1.7 Spectral bands = 224 Binned by 2 Spatial pixels = 1024 Spectral binning options = 2, 4, 8 Spatial binning options = 1, 2 Multiple ROI = User-selectable Maximum frame rate = 330 fps Full frame Dynamic range = 1420 SNR = 400:1 2 spectral binning, 1 spatial binning Power input = 10-30 VDC. Use separate battery or UAV/gimbal power Power consumption = 17 W Typical Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download Storage temperature = -20 ? +50C Operating temperature = +5 ? +40C Relative humidity = 5 - 90 %. Non-condensing Drone options = Multirotor with gimbal/ Multirotor, no gimbal/ Fixed Wing UAV. Any drone with adequate payload capacity can be used. Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used Gimbal weight = 2.2 - 2.7 kg. Typical gimbal solution Operating height = 15 - 150 m. Typical, local limitations may apply GNSS/IMU = Trimble APX-15 GPS Antenna = Trimble AV 14 Internal Memory = 512GB SSD Dimensions (W x H x L) = 131 x 152 x 202 mm Weight (without gimbal) = 2.1 kg Weight (with gimbal) = 4.8 kg. Typical gimbal solution |
Leave a Reply