| Content | Fenix
FENIX is optimized for the most demanding geological, law enforcement, and environmental applications. In a single continuous image, FENIX spectral camera delivers the best hyperspectral data ever seen over VNIR, NIR, and SWIR wavelengths. FENIX offers extreme ruggedness and 75% reduction in size and weight compared to previous multi-sensor systems. The excellence in technical performance and physical size has been achieved through innovative and unique ?single optics dual spectrograph? design. | Specim FX10+
The Specim FX10+ is a high-speed line-scan hyperspectral camera optimized for applications requiring fast imaging. Its high resolution ensures accurate and detailed imaging at a rapid pace. Specim FX10+ operates in the visible and near-infrared (VNIR) region from 400 to 1000 nm. | HySpex Mjolnir S-620
The HySpex Mjolnir S-620 hyperspectral imaging system for UAVs is the SWIR version of the Mjolnir camera series. Similar to the VNIR version, it provides a unique combination of small form factor and low mass, combined with high-performance specifications and scientific grade data quality.
With a weight of less than 4.5 kg and less than 50 W power consumption, HySpex Mjolnir S-620 is very well suited for a wide range of UAVs.
NEO offers high-performance unmanned aerial vehicles, fully integrated with the HySpex Mjolnir S-620. The UAV is fitted with a standard battery package allowing up to 30 minutes of flight time. All HySpex Mjolnir systems can also be mounted on a tripod and rotation stage for ground use. | HySpex SWIR-384
The HySpex SWIR-384 hyperspectral camera is developed for field, laboratory, and airborne applications.
The state of the art MCT sensor with cooling down to 150K yields low background noise, high dynamic range, and exceptional SNR levels. With a max frame rate of 400 fps, combined with an aberration-corrected optical system with high optical throughput (f/2), the data quality, speed, and sensitivity is truly state of the art.
A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters with a spatial resolution of 53 ?m to infinity e.g. airborne remote sensing. | HySpex SWIR-640
The HySpex SWIR-640 hyperspectral camera is developed for field, laboratory, and airborne applications.
HySpex SWIR-640 offers high spatial resolution by using a unique MCT sensor. The FPA is cooled to 150K using a sterling cooler, yielding low background noise, high dynamic range, and exceptional SNR levels. The camera offers an aberration-corrected optical system with high optical throughput (f/2.0), the data quality, sensitivity, and resolution is truly state of the art.
A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters, with a spatial resolution of 32 ?m, to infinity for e.g. airborne remote sensing. | Specim AFX17
Specim AFX17 is a NIR hyperspectral imaging solution with an HSI camera, a compact and powerful computer, and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types. |
| Description | | Spectral Range = 400-1000 nm
Spectral resolution (FWHM) = 15 nm, Typical mean
Spectral sampling/pixel = 6.3 nm, With default binning
Spectral bands = 100, With default binning
Numerical aperture = 1.7, With default lens
Optics magnification = 0.80
Effective pixel size = 19.9x9.97 ?m, At fore lens image plane
Effective slit width = 42 ?m, At fore lens image plane
Effective slit length = 10.2 mm, At fore lens image plane
SNR @ max. signal = 420 : 1
Spatial samples = 1024
Bit depth = 12
Maximum frame rate = 705 FPS full range. With 2-spectral binning (Bands: Max FPS) = 1:9900/5:6500/20:2800/35:1813/70:985
Binning = 2,4,8 spectral and spatial, Default: 2 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest, Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI?s
Pixel operability = 99.993%
Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). AIE: Unified spectral calibration + corrected smile and keystone aberrations. One point NUC
Sensor material = CMOS
Sensor cooling = Passive
Full well capacity = 90 ke-
Read-out modes = IWR / ITR
Optics temperature = Passive
Lens mount = Custom mount
Fore lens FOV options:12 deg/38 deg (default)/47 deg/51 deg/83 deg. Only the default lens is specifically designed for FX10. With other lens options, optical parameters may vary.
Camera digital data output/control interface = GigE Vision
Camera control protocols = GenICam, ASCII
Power input = 12 V DC (+-10%)
Power consumption = Max 4 W
Connectors = Industrial Ethernet
IP = IP52
Dimensions (L x W x H) 150 x 85 x 71 mm Mounting surface option on three sides.
Mounting kit adds 24 mm distance on mounting side.
Weight 1.3 kg
Storage temperature = -20 ... +50?C (non-condensing)
Operating temperature = +5 ? +40?C (non-condensing)
Relative humidity = 5% - 95% (non-condensing) | Spectral range = 970 - 2500 nm
Spatial pixels = 620
Spectral channels and sampling = 300 bands @ 5.1 nm
F-number = F1.9
FOV = 20?
Pixel FOV across/along = 0.54/0.54 mrad
Bit resolution = 16 bit
Noise floor = 80 e-
Dynamic range = 10000
Peak SNR (at full resolution) > 900
Max speed (at full resolution) = 170 fps
Power consumption* = 50 W
Dimensions (l-w-h)* = 254 - 175 - 170 mm
Weight* < 4.5 kg
*Includes IMU/GPS and DAU - <5 kg including standard battery | Spectral range = 930 - 2500 nm
Spatial pixels = 384
Spectral channels = 288
Spectral sampling = 5.45 nm
FOV* = 16?
Pixel FOV across/along* = 0.73/0.73 mrad
Bit resolution = 16 bit
Noise floor = 150 e-
Dynamic range = 7500
Peak SNR (at full resolution) > 1100
Max speed (at full resolution) = 400 fps
Power consumption = 30 W
Dimensions (l-w-h) = 38 - 12- 17.5 cm
Weight = 5.7 kg
Camera Interface = CameraLink
*Can be doubled with FOV expander | Spectral range = 960 - 2500 nm
Spatial pixels = 640
Spectral channels = 360
Spectral sampling = 4.38 nm
FOV* = 16?
Pixel FOV across/along* = 0.44/0.44 mrad
Bit resolution = 16 bit
Noise floor = 80 e-
Dynamic range = 7500
Peak SNR (at full resolution) > 800
Max speed (at full resolution) = 235 fps
Power consumption = 10 W
Dimensions (l-w-h) = 36 - 11- 15 cm
Weight = 4.1 kg
Camera Interface = CameraLink
*Can be doubled with FOV expander | Spectral Range = 900 - 1700 nm
Spectral sampling = 3.5 nm
Spectral resolution = 8.0 nm
Fore lens focal length = 18 mm
Field of view = 38 deg
F/# = 1.7
Spectral bands = 224 Binned by 2
Spatial pixels = 640
Spectral binning options = 1, 2, 4, 8
Spatial binning options = 1, 2
Multiple ROI = User-selectable
Maximum frame rate = 670 fps, Full frame
Dynamic range = 3400
SNR = 1200:1 Binned by 1 spectrally, 1 spatially
Power input = 10-30 VDC Use the supplied battery or drone/gimbal power
Power consumption = 24 W, Typical
Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download
Storage temperature = -20 ? +50C
Operating temperature = +5 ? +40C
Relative humidity = 5 - 90 %, Non-condensing
Drone options = Multirotor with gimbal/Multirotor, no gimbal/Fixed Wing UAV. Any drone with adequate payload capacity can be used
Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used
Gimbal weight = 2.2 - 2.7 kg ,Typical gimbal solution
Operating height = 50 - 150 m. Typical, local limitations apply
GNSS/IMU = Trimble APX-15
GPS Antenna = Trimble AV 14
Internal Memory = 512GB SSD
Dimensions (W x H x L) = 131 x 152 x 202 mm
Weight (without gimbal) = 2.4 kg
Weight (with gimbal = 5.1 kg. Typical gimbal solution |
Leave a Reply