Content | Fenix
FENIX is optimized for the most demanding geological, law enforcement, and environmental applications. In a single continuous image, FENIX spectral camera delivers the best hyperspectral data ever seen over VNIR, NIR, and SWIR wavelengths. FENIX offers extreme ruggedness and 75% reduction in size and weight compared to previous multi-sensor systems. The excellence in technical performance and physical size has been achieved through innovative and unique ?single optics dual spectrograph? design. | HySpex VNIR-1800
The HySpex VNIR-1800 hyperspectral camera is developed for field, laboratory, and airborne applications.
HySpex VNIR-1800 utilizes a cutting edge actively cooled and stabilized scientific CMOS detector. This makes VNIR-1800 the ideal camera for high-end data acquisitions where high radiometric accuracy is required. The dynamic range of 20 000 ensures outstanding SNR levels even in darker areas of an image of highly dynamic scenes. With a max frame rate of 260 fps, combined with aberration-corrected optics and high optical throughput (f/2.5), HySpex VNIR-1800 offers a unique combination of
data quality, high speed, and sensitivity. A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters with a spatial resolution of 24 ?m to infinity e.g. airborne remote sensing. | Specim FX17
Specim FX17 hyperspectral camera operates in the near-infrared region and can literally see the invisible. It can reveal the targets? chemical composition, moisture, and foreign objects that are invisible to the human eye. Specim FX17 can, for example, detect different plastic types for recycling and measure the sugar level of fruits and vegetables and the moisture percentage of baked goods. | SWIR
SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection.
To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal.
Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. | Pika UV
330 - 800 nm
Ultraviolet + Visible
The Pika UV (formerly NUV2) is a hyperspectral camera that scans the Visible and Near Ultraviolet (VIS+NUV) spectral range. An optimized objective lens provides excellent imaging throughout the entire spectral range.
Because halogen lights have low output in much of the NUV, Resonon offers an NUV lighting module to augment illumination for our desktop system.
The Pika UV can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. | Pika IR-L+
925 - 1700 nm
Lightweight, High-Precision Infrared
The Pika IR-L+ imager is a high spatial and spectral resolution Near-Infrared (925-1,700 nm) imager in a lightweight, compact format. It is well suited for field research, yet compatible with all imaging platforms (airborne, benchtop, or outdoor).
For a compact, lightweight Visible light spectral range option, please see the Pika L.
For higher imaging speeds, please see the Pika IR-L. |
Description | | Spectral range = 400 - 1000 nm
Spatial pixels = 1800
Spectral channels = 186
Spectral sampling = 3.26 nm
FOV* = 17?
Pixel FOV across/along* = 0.16/0.32 mrad
Bit resolution = 16 bit
Noise floor = 2.4 e-
Dynamic range = 20000
Peak SNR (at full resolution) > 255
Max speed (at full resolution) = 260 fps
Power consumption = 30 W
Dimensions (l-w-h) = 39 - 9.9 - 15 cm
Weight = 5.0 kg
Camera Interface = CameraLink
*Can be doubled with FOV expander | Spectral Range = 900-1700 nm
Spectral resolution (FWHM) = 8 nm (mean)
Spectral sampling/pixel = 3.5 nm
Spectral bands = 224 With default binning
Numerical aperture = 1.7 With default lens
Optics magnification = 0.80
Effective pixel size = 18.7 ?m At fore lens image plane
Effective slit width Physical width = 42?m.
Projection on sensor = 32 ?m (M=1.3) At fore lens image plane
Effective slit length = 12.0 mm At fore lens image plane
SNR @ max. signal = 1000:1
Bit depth = 12
Maximum frame rate = 670 (FX17)/ 527 (FX17e) FPS full range
Binning = 1,2,4 spectral and spatial Default: 1 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI and the total number of rows included in the mMROI?s.
Pixel operability = 99.5%. Allowed clusters: Size 2-6 pixels: N/A/ Size 7-12 pixels: ? 6/ Size 13-19 pixels: ? 2/ Size 20-35 pixels: ? 1/ Size > 35: 0
Image corrections = Non uniformity correction/ Bad pixel replacement/ Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor material = InGaAs
Sensor cooling = TEC
Full well capacity = 1.44 Me-
Read-out modes = IWR / ITR
Optics temperature = Passive Default is 20 degrees Celsius
Lens mount = Custom mount
Fore lens FOV options = 12 deg/38 deg (default)/53 deg/66 deg/75 deg/90 deg. Only the default lens is specifically designed for FX17. With other lens options, optical parameters may vary.
Camera digital data output/control interface = GigE Vision, CameraLink
Camera control protocols = GenICam, ASCII
Power input = 12 V DC (+-10%)
Power consumption = Max 24 W
Connectors = Industrial Ethernet OR CameraLink (standard MDR 26-pin). Power - Fischer 12pin DBPLU1031Z012|130G
IP = IP52
Dimensions (L x W x H) = 150 x 75 x 85 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side.
Weight = 1.56 kg
Storage temperature = -20 ... +50 oC (non-condensing)
Operating temperature = +5 ... +40 oC (non-condensing)
Relative humidity = 5% - 95% (non-condensing) | Spectral range = 1000 - 2500 nm
Spectral resolution (FWHM) = 12 nm (30 ?m slit)
Spectral sampling / pixel = 5.6 nm
F/# = F/2.0
Slit width = 30 ?m (50 or 80 ?m optional)
Effective slit length = 9.2 mmRICAL CHARACTERISTICS
Sensor = Cryogenically cooled MCT detector
Spatial pixels = 384
Spectral bands = 288
Pixel size = 24 x 24 ?m
Detector cooling = Stirling, 25 000 h MTTF
Signal-to-noise ratio = 1050:1 (at max. signal level)
Camera output = 16 bit CameraLink
Data cable Length = 5m
Camera control = USB/RS232
Frame grabber = NI-1433
Epix grabber = E4*
Frame rate = 450 fps (maximum full frame)
Exposure time range = 0.1 - 20 ms
Power consumption = Nominal < 50 W
Input voltage = 18 - 36 VNICAL CHARACTERISTICS
Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm
Weight = 14 kg & approx. 5 kg
Body = Anodized aluminium with mounting screwholes
Lens mount = Standard C-mount
Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS
Storage = -20... +50 ?C
Operating = +5... +40 ?C non-condensing | Spectral Range (nm) = 330 - 800
Spectral Channels = 255
Spectral Bandwidth (nm) = 1.8
Spectral Resolution - FWHM (nm) = 2.8
Spatial Pixels = 1500
Max Frame Rate (fps) = 142
f/# = 2.8
InterfaceUSB = 3.0
Dimensions (mm) = 230 x 107 x 85
Weight, w/o lens (kg) = 2.27 | Spectral Range (nm) = 925 - 1700
Spectral Channels = 470
Spectral Bandwidth (nm) = 1.7
Spectral Resolution - FWHM (nm) = 3.8
Spatial Pixels = 640
Max Frame Rate (fps) = 176
f/# = 1.8
Interface = GigE
Dimensions (mm) = 210 x 68 x 63
Weight, w/o lens (kg) = 1.01 |
Reviews
There are no reviews yet.