Specim AFX10
Specim AFX10 is a VNIR hyperspectral imaging solution with an HSI camera, a small and powerful computer and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types.
Specim AFX10
VNIR Compare
Specim AFX10
Spectral Range = 400 – 1000 nm
Spectral sampling = 2.68 nm
Spectral resolution = 5.5 nm
Fore lens focal length = 15 mm
Field of view = 38 deg
F/# = 1.7
Spectral bands = 224 Binned by 2
Spatial pixels = 1024
Spectral binning options = 2, 4, 8
Spatial binning options = 1, 2
Multiple ROI = User-selectable
Maximum frame rate = 330 fps Full frame
Dynamic range = 1420
SNR = 400:1 2 spectral binning, 1 spatial binning
Power input = 10-30 VDC. Use separate battery or UAV/gimbal power
Power consumption = 17 W Typical
Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download
Storage temperature = -20 ? +50C
Operating temperature = +5 ? +40C
Relative humidity = 5 – 90 %. Non-condensing
Drone options = Multirotor with gimbal/ Multirotor, no gimbal/ Fixed Wing UAV. Any drone with adequate payload capacity can be used.
Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used
Gimbal weight = 2.2 – 2.7 kg. Typical gimbal solution
Operating height = 15 – 150 m. Typical, local limitations may apply
GNSS/IMU = Trimble APX-15
GPS Antenna = Trimble AV 14
Internal Memory = 512GB SSD
Dimensions (W x H x L) = 131 x 152 x 202 mm
Weight (without gimbal) = 2.1 kg
Weight (with gimbal) = 4.8 kg. Typical gimbal solution
Quick Comparison
| Specim AFX10 remove | Specim SWIR remove | Hyspex SWIR-640 remove | HySpex VNIR-3000N remove | Specim FX17 remove | HySpex Baldur S-640i N remove | |
|---|---|---|---|---|---|---|
| Name | Specim AFX10 remove | Specim SWIR remove | Hyspex SWIR-640 remove | HySpex VNIR-3000N remove | Specim FX17 remove | HySpex Baldur S-640i N remove |
| Image |  |  |  |  |  |  |
| Rating | ||||||
| Content | Specim AFX10 Specim AFX10 is a VNIR hyperspectral imaging solution with an HSI camera, a small and powerful computer and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types. | SWIR SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection. To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal. Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. | HySpex SWIR-640 The HySpex SWIR-640 hyperspectral camera is developed for field, laboratory, and airborne applications. HySpex SWIR-640 offers high spatial resolution by using a unique MCT sensor. The FPA is cooled to 150K using a sterling cooler, yielding low background noise, high dynamic range, and exceptional SNR levels. The camera offers an aberration-corrected optical system with high optical throughput (f/2.0), the data quality, sensitivity, and resolution is truly state of the art. A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters, with a spatial resolution of 32 ?m, to infinity for e.g. airborne remote sensing. | HySpex VNIR-3000 N HySpex VNIR-3000 N is developed for field, laboratory, and airborne applications. HySpex VNIR-3000 N utilizes the same spectrograph as the other classical HySpex VNIR models. With a pixel size of 3.45?m, compared to 6. 5?m for VNIR-1800, HySpex VNIR-3000 N will have less than 1.6 pixels per FWHM of the PSF spatially and less than 1.8 bands spectrally, ensuring that narrow band features will be resolved equally for all cameras. With 3000 spatial pixels, 300 bands and a noise floor of 2.4e-, HySpex VNIR-3000N will provide outstanding SNR levels in dark environments. The camera is offered with a USB connection, allowing camera operation from any computer and reducing the cost of supplementing equipment. To visualize that the camera has a wider PSF per pixel and band relative to our normal extremely sharp cameras, we have added an N for Nyquist to the model name. | Specim FX17 Specim FX17 hyperspectral camera operates in the near-infrared region and can literally see the invisible. It can reveal the targets? chemical composition, moisture, and foreign objects that are invisible to the human eye. Specim FX17 can, for example, detect different plastic types for recycling and measure the sugar level of fruits and vegetables and the moisture percentage of baked goods. | HySpex Baldur S-640i N Baldur S-640i N covers the spectral range from 950-1730nm. All Baldur cameras are Nyquist cameras giving a spectral resolution of 2 spectral bands while capturing 4 times as much light as the classic systems. To ensure that the most information per framerate is provided, the spectral resolution is kept very close to 2 bands. Additionally, the spatial resolution of Baldur S-640i N is better than 1.5 pixels, yielding a very sharp camera. |
| Description | Spectral Range = 400 - 1000 nm Spectral sampling = 2.68 nm Spectral resolution = 5.5 nm Fore lens focal length = 15 mm Field of view = 38 deg F/# = 1.7 Spectral bands = 224 Binned by 2 Spatial pixels = 1024 Spectral binning options = 2, 4, 8 Spatial binning options = 1, 2 Multiple ROI = User-selectable Maximum frame rate = 330 fps Full frame Dynamic range = 1420 SNR = 400:1 2 spectral binning, 1 spatial binning Power input = 10-30 VDC. Use separate battery or UAV/gimbal power Power consumption = 17 W Typical Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download Storage temperature = -20 ? +50C Operating temperature = +5 ? +40C Relative humidity = 5 - 90 %. Non-condensing Drone options = Multirotor with gimbal/ Multirotor, no gimbal/ Fixed Wing UAV. Any drone with adequate payload capacity can be used. Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used Gimbal weight = 2.2 - 2.7 kg. Typical gimbal solution Operating height = 15 - 150 m. Typical, local limitations may apply GNSS/IMU = Trimble APX-15 GPS Antenna = Trimble AV 14 Internal Memory = 512GB SSD Dimensions (W x H x L) = 131 x 152 x 202 mm Weight (without gimbal) = 2.1 kg Weight (with gimbal) = 4.8 kg. Typical gimbal solution | Spectral range = 1000 - 2500 nm Spectral resolution (FWHM) = 12 nm (30 ?m slit) Spectral sampling / pixel = 5.6 nm F/# = F/2.0 Slit width = 30 ?m (50 or 80 ?m optional) Effective slit length = 9.2 mmRICAL CHARACTERISTICS Sensor = Cryogenically cooled MCT detector Spatial pixels = 384 Spectral bands = 288 Pixel size = 24 x 24 ?m Detector cooling = Stirling, 25 000 h MTTF Signal-to-noise ratio = 1050:1 (at max. signal level) Camera output = 16 bit CameraLink Data cable Length = 5m Camera control = USB/RS232 Frame grabber = NI-1433 Epix grabber = E4* Frame rate = 450 fps (maximum full frame) Exposure time range = 0.1 - 20 ms Power consumption = Nominal < 50 W Input voltage = 18 - 36 VNICAL CHARACTERISTICS Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm Weight = 14 kg & approx. 5 kg Body = Anodized aluminium with mounting screwholes Lens mount = Standard C-mount Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS Storage = -20... +50 ?C Operating = +5... +40 ?C non-condensing | Spectral range = 960 - 2500 nm Spatial pixels = 640 Spectral channels = 360 Spectral sampling = 4.38 nm FOV* = 16? Pixel FOV across/along* = 0.44/0.44 mrad Bit resolution = 16 bit Noise floor = 80 e- Dynamic range = 7500 Peak SNR (at full resolution) > 800 Max speed (at full resolution) = 235 fps Power consumption = 10 W Dimensions (l-w-h) = 36 - 11- 15 cm Weight = 4.1 kg Camera Interface = CameraLink *Can be doubled with FOV expander | Spectral range = 400 - 1000 nm Spatial pixels = 3000 Spectral channels = 300 Spectral sampling = 2.0 nm FOV* = 16? Pixel FOV across/along* = 0.096/0.32 mrad Bit resolution = 12 bit Noise floor = 2.37 e- Dynamic range = 11000 Peak SNR (at full resolution) > 170 Max speed (at full resolution) = 117 fps Power consumption = 30 W Dimensions (l-w-h) = 39 - 9.9- 15 cm Weight = 5.0 kg Camera Interface = USB3 *Can be doubled with FOV expander | Spectral Range = 900-1700 nm Spectral resolution (FWHM) = 8 nm (mean) Spectral sampling/pixel = 3.5 nm Spectral bands = 224 With default binning Numerical aperture = 1.7 With default lens Optics magnification = 0.80 Effective pixel size = 18.7 ?m At fore lens image plane Effective slit width Physical width = 42?m. Projection on sensor = 32 ?m (M=1.3) At fore lens image plane Effective slit length = 12.0 mm At fore lens image plane SNR @ max. signal = 1000:1 Bit depth = 12 Maximum frame rate = 670 (FX17)/ 527 (FX17e) FPS full range Binning = 1,2,4 spectral and spatial Default: 1 spectral x 1 spatial ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI and the total number of rows included in the mMROI?s. Pixel operability = 99.5%. Allowed clusters: Size 2-6 pixels: N/A/ Size 7-12 pixels: ? 6/ Size 13-19 pixels: ? 2/ Size 20-35 pixels: ? 1/ Size > 35: 0 Image corrections = Non uniformity correction/ Bad pixel replacement/ Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations Sensor material = InGaAs Sensor cooling = TEC Full well capacity = 1.44 Me- Read-out modes = IWR / ITR Optics temperature = Passive Default is 20 degrees Celsius Lens mount = Custom mount Fore lens FOV options = 12 deg/38 deg (default)/53 deg/66 deg/75 deg/90 deg. Only the default lens is specifically designed for FX17. With other lens options, optical parameters may vary. Camera digital data output/control interface = GigE Vision, CameraLink Camera control protocols = GenICam, ASCII Power input = 12 V DC (+-10%) Power consumption = Max 24 W Connectors = Industrial Ethernet OR CameraLink (standard MDR 26-pin). Power - Fischer 12pin DBPLU1031Z012|130G IP = IP52 Dimensions (L x W x H) = 150 x 75 x 85 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight = 1.56 kg Storage temperature = -20 ... +50 oC (non-condensing) Operating temperature = +5 ... +40 oC (non-condensing) Relative humidity = 5% - 95% (non-condensing) | Spectral Range = 950 - 1730 nm Spectral bands = 232 Max speed* = 500 fps Spectral sampling = 3.36 nm Spectral FWHM <2 bands Spatial FWHM <1.5 pixels Spatial pixels = 640 Keystone <20% of a pixel Smile <20% of band FOV = 16? / 40? Bit resolution = 12 bit Noise floor = HG:8.5/MG:32/LG:270 e- Peak SNR = HG:150/MG:275/LG:800 Dynamic range = HG:2650/MG:2360/LG:2360 ROI* = All bands can be selected/deselected individually External trigger options = LVDS, 5V/12V/24V TTL Dimensions (l-w-h) = 364 - 105 - 153 mm Camera Interface = GigE * Reducing the number of spectral channels with ROI will proportionally increase the max framerate |
Leave a Reply