| Content | Very Compact Multispectral Cameras CMS4 Multispetral cameras are specially designed to allow high integration of VIS/NIR multispectral systems. These lightweight (less than 170g) and very small footprint (52x62x40mm) cameras split the image into 8 spectral bands plus 1 B&W channel. Made by hybridization of a custom Bayer-like mosaic filter on a commercial 4.2 MPixel CMOS Sensor, they allow extracting the spectrum on each point of an image. SILIOS offers three different CMS4 cameras (CMS4-C, CMS4-V and CMS4-S) to address a wide spectrum of applications. | SWIR
SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection.
To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal.
Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. | HySpex Baldur S-640i N
Baldur S-640i N covers the spectral range from 950-1730nm.
All Baldur cameras are Nyquist cameras giving a spectral resolution of 2 spectral bands while capturing 4 times as much light as the classic systems. To ensure that the most information per framerate is provided, the spectral resolution is kept very close to 2 bands. Additionally, the spatial resolution of Baldur S-640i N is better than 1.5 pixels, yielding a very sharp camera. | Specim FX17
Specim FX17 hyperspectral camera operates in the near-infrared region and can literally see the invisible. It can reveal the targets? chemical composition, moisture, and foreign objects that are invisible to the human eye. Specim FX17 can, for example, detect different plastic types for recycling and measure the sugar level of fruits and vegetables and the moisture percentage of baked goods. | Specim FX50
Specim FX50 is the only hyperspectral camera on the market covering the full mid-wave infrared (MWIR) spectral range of 2.7 - 5.3 ?m required, for example, in black plastics sorting. Specim FX50 is a high-speed, accurate, and efficient line-scan hyperspectral camera designed specifically for industrial environments. | HySpex Baldur V-1024 N
Baldur V-1024 N covers the full VNIR spectral range from 400-1000nm and is configurable within one octave in the same range.
All Baldur cameras are Nyquist cameras giving a spectral resolution of 2 spectral bands while capturing 4 times as much light as the classic systems. To ensure that the most information per framerate is provided, the spectral resolution is kept very close to 2 bands. Additionally, the spatial resolution of Baldur V-1024 N is better than 1.7 pixels, yielding a very sharp camera. |
| Description | Spectral range = 650 - 930 nm
Band width (FWHM avg) = 40 nm
Macropixel configuration = 3 x 3 (8 color bands + 1 B&W)
Array type = CMOS
Optical Interface = CS-mount (C-mount compatible with additional C-ring)
Resolution (raw picture) = 2048 (H) x 2048 (V)
Resolution (spectral pictures) = 682 (H) x 682 (V)
Pixel pitch = 5.5 ?m
Maximum frame rate = 65 Hz (camera acquisition) / 20 Hz (COLOR SHADES Lab)
Exposure time range = 100 ?s to 5 s
ADC = 10-bit
Camera control = USB 3.0
Digital output = 10-bit USB 3.0
Power supply = USB 3.0
Dimension (W x H x L) = 52 x 62 x 40 mm
Weight (camera head) = 180 g | Spectral range = 1000 - 2500 nm
Spectral resolution (FWHM) = 12 nm (30 ?m slit)
Spectral sampling / pixel = 5.6 nm
F/# = F/2.0
Slit width = 30 ?m (50 or 80 ?m optional)
Effective slit length = 9.2 mmRICAL CHARACTERISTICS
Sensor = Cryogenically cooled MCT detector
Spatial pixels = 384
Spectral bands = 288
Pixel size = 24 x 24 ?m
Detector cooling = Stirling, 25 000 h MTTF
Signal-to-noise ratio = 1050:1 (at max. signal level)
Camera output = 16 bit CameraLink
Data cable Length = 5m
Camera control = USB/RS232
Frame grabber = NI-1433
Epix grabber = E4*
Frame rate = 450 fps (maximum full frame)
Exposure time range = 0.1 - 20 ms
Power consumption = Nominal < 50 W
Input voltage = 18 - 36 VNICAL CHARACTERISTICS
Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm
Weight = 14 kg & approx. 5 kg
Body = Anodized aluminium with mounting screwholes
Lens mount = Standard C-mount
Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS
Storage = -20... +50 ?C
Operating = +5... +40 ?C non-condensing | Spectral Range = 950 - 1730 nm
Spectral bands = 232
Max speed* = 500 fps
Spectral sampling = 3.36 nm
Spectral FWHM <2 bands
Spatial FWHM <1.5 pixels
Spatial pixels = 640
Keystone <20% of a pixel
Smile <20% of band
FOV = 16? / 40?
Bit resolution = 12 bit
Noise floor = HG:8.5/MG:32/LG:270 e-
Peak SNR = HG:150/MG:275/LG:800
Dynamic range = HG:2650/MG:2360/LG:2360
ROI* = All bands can be selected/deselected individually
External trigger options = LVDS, 5V/12V/24V TTL
Dimensions (l-w-h) = 364 - 105 - 153 mm
Camera Interface = GigE
* Reducing the number of spectral channels with ROI will proportionally increase the max framerate | Spectral Range = 900-1700 nm
Spectral resolution (FWHM) = 8 nm (mean)
Spectral sampling/pixel = 3.5 nm
Spectral bands = 224 With default binning
Numerical aperture = 1.7 With default lens
Optics magnification = 0.80
Effective pixel size = 18.7 ?m At fore lens image plane
Effective slit width Physical width = 42?m.
Projection on sensor = 32 ?m (M=1.3) At fore lens image plane
Effective slit length = 12.0 mm At fore lens image plane
SNR @ max. signal = 1000:1
Bit depth = 12
Maximum frame rate = 670 (FX17)/ 527 (FX17e) FPS full range
Binning = 1,2,4 spectral and spatial Default: 1 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI and the total number of rows included in the mMROI?s.
Pixel operability = 99.5%. Allowed clusters: Size 2-6 pixels: N/A/ Size 7-12 pixels: ? 6/ Size 13-19 pixels: ? 2/ Size 20-35 pixels: ? 1/ Size > 35: 0
Image corrections = Non uniformity correction/ Bad pixel replacement/ Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor material = InGaAs
Sensor cooling = TEC
Full well capacity = 1.44 Me-
Read-out modes = IWR / ITR
Optics temperature = Passive Default is 20 degrees Celsius
Lens mount = Custom mount
Fore lens FOV options = 12 deg/38 deg (default)/53 deg/66 deg/75 deg/90 deg. Only the default lens is specifically designed for FX17. With other lens options, optical parameters may vary.
Camera digital data output/control interface = GigE Vision, CameraLink
Camera control protocols = GenICam, ASCII
Power input = 12 V DC (+-10%)
Power consumption = Max 24 W
Connectors = Industrial Ethernet OR CameraLink (standard MDR 26-pin). Power - Fischer 12pin DBPLU1031Z012|130G
IP = IP52
Dimensions (L x W x H) = 150 x 75 x 85 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side.
Weight = 1.56 kg
Storage temperature = -20 ... +50 oC (non-condensing)
Operating temperature = +5 ... +40 oC (non-condensing)
Relative humidity = 5% - 95% (non-condensing) | Spectral Range = 2.7 - 5.3 ?m
Spectral resolution (FWHM) = 35 nm
Spectral sampling/pixel = 8.44 nm, Without binning
Spectral bands = 154, With default binning
Numerical aperture = 2.0
Optics magnification = 0.5
Effective pixel size = 30 ?m, At fore lens image plane
Effective slit width = 104 ?m, At fore lens image plane
Effective slit length = 19.2 mm, At fore lens image plane
Dynamic Range = 1600:1 with 1.5 ms exposure time Usable dynamic range / noise
Spatial samples = 640
Bit depth = 16
Maximum frame rate = 380 fps, Full image with default binning
Binning = 1,2,4 spectral and spatial, Default: 2 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI - not the total number of rows included in the mMROI?s.
Pixel operability = Number of operable pixels >99.7%. Allowed clusters: Size 4-8 pixels: <= 12/ Size 9-12 pixels: 2/ Size 13-19 pixels: 1/ Size >19 pixels: 0
Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor material = InSb
Integrated cooler = Stirling Up to 10000 hours
Full well capacity = 5.1 Me-
Read-out modes = IWR / ITR
Optics temperature = TEC-stabilized Default is 20 degrees Celsius
Lens mount = Custom mount
Fore lens options = OLEM43, OLEM23, OLEM17
Field of view = 24 deg, 45 deg, 60 deg
Camera digital data output/control interface = GigE Vision, Custom ethernet
Camera control protocols = GenICam, JSON-RPC
Power input = 24 V DC
Power consumption = Max 90 W, Typical 40 W, During simultaneous cool-down of optics and detector
Connectors = Ethernet/ Aux - 0306423 (09-0428-90-08) Binder 8pin/ Power - 0306627 (LF10WBR-4P) Hirose 4pin Trigger in
IP = IP40
Dimensions (L x W x H) = 280 x 202 x 169 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side.
Weight = 7 kg
Storage temperature = -20 ... +50 oC
Operating temperature = +5 ... +40 oC
Relative humidity = 5% - 95% (non-condensing) | Spectral Range = 400-800/485-960/400-1000 nm
Spatial pixels = 1024
Spectral bands = 72/88/106
Max speed* = 1000/800/700 fps
Spectral sampling = 5.5 nm
Spectral FWHM <2 bands?
Spatial FWHM < 1.7 pixels
Keystone <15% of a pixel
Smile <15% of band
FOV = 16? / 40?
Bit resolution = 12
Noise floor = 11e
Peak SNR >286
Dynamic range = 2560
ROI* = 8 independent ROIs
Dimensions (l-w-h) = 316 - 105 - 153 mm
Camera Interface = CameraLink
* Reducing the number of spectral channels with ROI will proportionally increase the max framerate |
Leave a Reply