| Content | Very Compact Multispectral Cameras CMS Multispetral cameras are specially designed to allow high integration of VIS/NIR multispectral systems. These lightweight (less than 75 g) and very small footprint (56x56x22mm) cameras split the image into 8 spectral bands plus 1 B&W channel. Made by hybridization of a custom Bayer-like mosaic filter on a commercial 1.3 MPixel CMOS Sensor, they allow extracting the spectrum on each point of an image. SILIOS offers three different CMS cameras (CMS-C, CMS-V and CMS-S) to address a wide spectrum of applications. | Specim AFX10
Specim AFX10 is a VNIR hyperspectral imaging solution with an HSI camera, a small and powerful computer and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types. | Pika IR-L+
925 - 1700 nm
Lightweight, High-Precision Infrared
The Pika IR-L+ imager is a high spatial and spectral resolution Near-Infrared (925-1,700 nm) imager in a lightweight, compact format. It is well suited for field research, yet compatible with all imaging platforms (airborne, benchtop, or outdoor).
For a compact, lightweight Visible light spectral range option, please see the Pika L.
For higher imaging speeds, please see the Pika IR-L. | Pika IR
900 - 1700 nm
High-Speed Infrared
The Pika IR (formerly Pika NIR-320) is a high-speed, cost-effective hyperspectral camera that covers the Near-Infrared (NIR) spectral range. It is our most popular imager for machine vision applications.
The Pika IR can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. | Pika IR+
900 - 1700 nm
High-Precision Infrared
The Pika IR+ (formerly Pika NIR-640) is a high-performance hyperspectral camera that covers the Near-Infrared (NIR) spectral range. It has high spatial and spectral resolutions and is often used for infrared laboratory applications. The Pika IR+ can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. | HySpex Mjolnir S-620
The HySpex Mjolnir S-620 hyperspectral imaging system for UAVs is the SWIR version of the Mjolnir camera series. Similar to the VNIR version, it provides a unique combination of small form factor and low mass, combined with high-performance specifications and scientific grade data quality.
With a weight of less than 4.5 kg and less than 50 W power consumption, HySpex Mjolnir S-620 is very well suited for a wide range of UAVs.
NEO offers high-performance unmanned aerial vehicles, fully integrated with the HySpex Mjolnir S-620. The UAV is fitted with a standard battery package allowing up to 30 minutes of flight time. All HySpex Mjolnir systems can also be mounted on a tripod and rotation stage for ground use. |
| Description | Spectral range = 650 - 930 nm
Band width (FWHM avg) = 40 nm
Macropixel configuration = 3 x 3 (8 color bands + 1 B&W)
Array type = CMOS
Optical Interface = CS-mount (C-mount compatible with additional C-ring)
Resolution (raw picture) = 1280 (H) x 1024 (V)
Resolution (spectral pictures) = 426 (H) x 339 (V)
Pixel pitch = 5.3 ?m
Maximum frame rate = 60 Hz
Exposure time range = 10 ?s to 2 s
ADC = 10-bit
Camera control = USB 3.0/ GigE
Digital output = 10-bit USB 3.0 / 10-bit GigE
Power supply = USB 3.0 External
Dimension (W x H x L) = 56 x 56 x 22 mm / 62 x 62 x 31 mm
Weight (camera head) = 100 g/ 110 g | Spectral Range = 400 - 1000 nm
Spectral sampling = 2.68 nm
Spectral resolution = 5.5 nm
Fore lens focal length = 15 mm
Field of view = 38 deg
F/# = 1.7
Spectral bands = 224 Binned by 2
Spatial pixels = 1024
Spectral binning options = 2, 4, 8
Spatial binning options = 1, 2
Multiple ROI = User-selectable
Maximum frame rate = 330 fps Full frame
Dynamic range = 1420
SNR = 400:1 2 spectral binning, 1 spatial binning
Power input = 10-30 VDC. Use separate battery or UAV/gimbal power
Power consumption = 17 W Typical
Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download
Storage temperature = -20 ? +50C
Operating temperature = +5 ? +40C
Relative humidity = 5 - 90 %. Non-condensing
Drone options = Multirotor with gimbal/ Multirotor, no gimbal/ Fixed Wing UAV. Any drone with adequate payload capacity can be used.
Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used
Gimbal weight = 2.2 - 2.7 kg. Typical gimbal solution
Operating height = 15 - 150 m. Typical, local limitations may apply
GNSS/IMU = Trimble APX-15
GPS Antenna = Trimble AV 14
Internal Memory = 512GB SSD
Dimensions (W x H x L) = 131 x 152 x 202 mm
Weight (without gimbal) = 2.1 kg
Weight (with gimbal) = 4.8 kg. Typical gimbal solution | Spectral Range (nm) = 925 - 1700
Spectral Channels = 470
Spectral Bandwidth (nm) = 1.7
Spectral Resolution - FWHM (nm) = 3.8
Spatial Pixels = 640
Max Frame Rate (fps) = 176
f/# = 1.8
Interface = GigE
Dimensions (mm) = 210 x 68 x 63
Weight, w/o lens (kg) = 1.01 | Spectral Range (nm) = 900 - 1700
Spectral Channels = 168
Spectral Bandwidth (nm) = 4.8
Spectral Resolution - FWHM (nm) = 8.8
Spatial Pixels = 320
Max Frame Rate (fps) = 508
f/# = 1.8
Interface = GigE
Dimensions (mm) = 264 x 115 x 88
Weight, w/o lens (kg) = 2.95 | Spectral Range (nm) = 900 - 1700
Spectral Channels = 336
Spectral Bandwidth (nm) = 2.4
Spectral Resolution - FWHM (nm) = 5.6
Spatial Pixels = 640
Max Frame Rate (fps) = 240
f/# = 1.8
Interface = GigE
Dimensions (mm) = 264 x 115 x 88
Weight, w/o lens (kg) = 2.95 | Spectral range = 970 - 2500 nm
Spatial pixels = 620
Spectral channels and sampling = 300 bands @ 5.1 nm
F-number = F1.9
FOV = 20?
Pixel FOV across/along = 0.54/0.54 mrad
Bit resolution = 16 bit
Noise floor = 80 e-
Dynamic range = 10000
Peak SNR (at full resolution) > 900
Max speed (at full resolution) = 170 fps
Power consumption* = 50 W
Dimensions (l-w-h)* = 254 - 175 - 170 mm
Weight* < 4.5 kg
*Includes IMU/GPS and DAU - <5 kg including standard battery |
Leave a Reply