| Content | Very Compact Multispectral Cameras CMS Multispetral cameras are specially designed to allow high integration of VIS/NIR multispectral systems. These lightweight (less than 75 g) and very small footprint (56x56x22mm) cameras split the image into 8 spectral bands plus 1 B&W channel. Made by hybridization of a custom Bayer-like mosaic filter on a commercial 1.3 MPixel CMOS Sensor, they allow extracting the spectrum on each point of an image. SILIOS offers three different CMS cameras (CMS-C, CMS-V and CMS-S) to address a wide spectrum of applications. | HySpex Mjolnir S-620
The HySpex Mjolnir S-620 hyperspectral imaging system for UAVs is the SWIR version of the Mjolnir camera series. Similar to the VNIR version, it provides a unique combination of small form factor and low mass, combined with high-performance specifications and scientific grade data quality.
With a weight of less than 4.5 kg and less than 50 W power consumption, HySpex Mjolnir S-620 is very well suited for a wide range of UAVs.
NEO offers high-performance unmanned aerial vehicles, fully integrated with the HySpex Mjolnir S-620. The UAV is fitted with a standard battery package allowing up to 30 minutes of flight time. All HySpex Mjolnir systems can also be mounted on a tripod and rotation stage for ground use. | Pika L
400 - 1000 nm
Lightweight, Compact VNIR
The Pika L is a lightweight, compact hyperspectral camera that covers the Visible + Near-Infrared (VNIR) spectral range. It is our most popular imager for remote sensing applications.
The Pika L can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. | HySpex Baldur V-1024 N
Baldur V-1024 N covers the full VNIR spectral range from 400-1000nm and is configurable within one octave in the same range.
All Baldur cameras are Nyquist cameras giving a spectral resolution of 2 spectral bands while capturing 4 times as much light as the classic systems. To ensure that the most information per framerate is provided, the spectral resolution is kept very close to 2 bands. Additionally, the spatial resolution of Baldur V-1024 N is better than 1.7 pixels, yielding a very sharp camera. | Specim FX50
Specim FX50 is the only hyperspectral camera on the market covering the full mid-wave infrared (MWIR) spectral range of 2.7 - 5.3 ?m required, for example, in black plastics sorting. Specim FX50 is a high-speed, accurate, and efficient line-scan hyperspectral camera designed specifically for industrial environments. | SWIR
SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection.
To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal.
Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. |
| Description | Spectral range = 430 - 700 nm
Band width (FWHM avg) = 40 nm
Macropixel configuration = 3 x 3 (8 color bands + 1 B&W)
Array type = CMOS
Optical Interface = CS-mount (C-mount compatible with additional C-ring)
Resolution (raw picture) = 1280 (H) x 1024 (V)
Resolution (spectral pictures) = 426 (H) x 339 (V)
Pixel pitch = 5.3 ?m
Maximum frame rate = 60 Hz
Exposure time range = 10 ?s to 2 s
ADC = 10-bit
Camera control = USB 3.0/ GigE
Digital output = 10-bit USB 3.0 / 10-bit GigE
Power supply = USB 3.0 External
Dimension (W x H x L) = 56 x 56 x 22 mm / 62 x 62 x 31 mm
Weight (camera head) = 100 g/ 110 g | Spectral range = 970 - 2500 nm
Spatial pixels = 620
Spectral channels and sampling = 300 bands @ 5.1 nm
F-number = F1.9
FOV = 20?
Pixel FOV across/along = 0.54/0.54 mrad
Bit resolution = 16 bit
Noise floor = 80 e-
Dynamic range = 10000
Peak SNR (at full resolution) > 900
Max speed (at full resolution) = 170 fps
Power consumption* = 50 W
Dimensions (l-w-h)* = 254 - 175 - 170 mm
Weight* < 4.5 kg
*Includes IMU/GPS and DAU - <5 kg including standard battery | Spectral Range (nm) = 400 - 1000
Spectral Channels = 281
Spectral Bandwidth (nm) = 2.1
Spectral Resolution - FWHM (nm) = 3.3
Spatial Pixels = 900
Max Frame Rate (fps) = 249
f/# = 2.4
Interface = USB 3.0
Dimensions (mm) = 115 x 104 x 66
Weight, w/o lens (kg) = 0.64 | Spectral Range = 400-800/485-960/400-1000 nm
Spatial pixels = 1024
Spectral bands = 72/88/106
Max speed* = 1000/800/700 fps
Spectral sampling = 5.5 nm
Spectral FWHM <2 bands?
Spatial FWHM < 1.7 pixels
Keystone <15% of a pixel
Smile <15% of band
FOV = 16? / 40?
Bit resolution = 12
Noise floor = 11e
Peak SNR >286
Dynamic range = 2560
ROI* = 8 independent ROIs
Dimensions (l-w-h) = 316 - 105 - 153 mm
Camera Interface = CameraLink
* Reducing the number of spectral channels with ROI will proportionally increase the max framerate | Spectral Range = 2.7 - 5.3 ?m
Spectral resolution (FWHM) = 35 nm
Spectral sampling/pixel = 8.44 nm, Without binning
Spectral bands = 154, With default binning
Numerical aperture = 2.0
Optics magnification = 0.5
Effective pixel size = 30 ?m, At fore lens image plane
Effective slit width = 104 ?m, At fore lens image plane
Effective slit length = 19.2 mm, At fore lens image plane
Dynamic Range = 1600:1 with 1.5 ms exposure time Usable dynamic range / noise
Spatial samples = 640
Bit depth = 16
Maximum frame rate = 380 fps, Full image with default binning
Binning = 1,2,4 spectral and spatial, Default: 2 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI - not the total number of rows included in the mMROI?s.
Pixel operability = Number of operable pixels >99.7%. Allowed clusters: Size 4-8 pixels: <= 12/ Size 9-12 pixels: 2/ Size 13-19 pixels: 1/ Size >19 pixels: 0
Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor material = InSb
Integrated cooler = Stirling Up to 10000 hours
Full well capacity = 5.1 Me-
Read-out modes = IWR / ITR
Optics temperature = TEC-stabilized Default is 20 degrees Celsius
Lens mount = Custom mount
Fore lens options = OLEM43, OLEM23, OLEM17
Field of view = 24 deg, 45 deg, 60 deg
Camera digital data output/control interface = GigE Vision, Custom ethernet
Camera control protocols = GenICam, JSON-RPC
Power input = 24 V DC
Power consumption = Max 90 W, Typical 40 W, During simultaneous cool-down of optics and detector
Connectors = Ethernet/ Aux - 0306423 (09-0428-90-08) Binder 8pin/ Power - 0306627 (LF10WBR-4P) Hirose 4pin Trigger in
IP = IP40
Dimensions (L x W x H) = 280 x 202 x 169 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side.
Weight = 7 kg
Storage temperature = -20 ... +50 oC
Operating temperature = +5 ... +40 oC
Relative humidity = 5% - 95% (non-condensing) | Spectral range = 1000 - 2500 nm
Spectral resolution (FWHM) = 12 nm (30 ?m slit)
Spectral sampling / pixel = 5.6 nm
F/# = F/2.0
Slit width = 30 ?m (50 or 80 ?m optional)
Effective slit length = 9.2 mmRICAL CHARACTERISTICS
Sensor = Cryogenically cooled MCT detector
Spatial pixels = 384
Spectral bands = 288
Pixel size = 24 x 24 ?m
Detector cooling = Stirling, 25 000 h MTTF
Signal-to-noise ratio = 1050:1 (at max. signal level)
Camera output = 16 bit CameraLink
Data cable Length = 5m
Camera control = USB/RS232
Frame grabber = NI-1433
Epix grabber = E4*
Frame rate = 450 fps (maximum full frame)
Exposure time range = 0.1 - 20 ms
Power consumption = Nominal < 50 W
Input voltage = 18 - 36 VNICAL CHARACTERISTICS
Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm
Weight = 14 kg & approx. 5 kg
Body = Anodized aluminium with mounting screwholes
Lens mount = Standard C-mount
Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS
Storage = -20... +50 ?C
Operating = +5... +40 ?C non-condensing |
Leave a Reply