Content | HySpex VS-1200
The HySpex VS-1200 hyperspectral camera is developed for airborne applications requiring extreme resolution in both VNIR and SWIR spectral regions.
The HySpex VS-1200 is a novel high-resolution instrument designed for airborne applications at altitudes greater than 400m.
The camera produces the highest scientific grade level data, commercially available, having FWHM less than 1.2 pixels spatially and less than 1.5 pixels spectrally. The combined VNIR-SWIR cube has coregistration errors, and smile and keystone of less than 10% of a pixel.
With 40 degrees FOV, the camera is ideal for mapping large areas with high accuracy and resolution.
The camera is delivered with an integrated high-performance IMU/GPS and data acquisition unit with removable storage bays as a standard. Existing navigation systems can also be integrated/utilized.
A standard passive damping solution is included as a part of the default delivery package, but mounting plates for active damping solutions, such as GSM4000 or PAV80 can be supplied. | HySpex Mjolnir V-1240
The HySpex Mjolnir V-1240 hyperspectral imaging system for UAVs provides a unique combination of small form factor and low mass, combined with high-performance specifications and scientific grade data quality.
With a weight of less than 4 kg and less than 50 W power consumption, HySpex Mjolnir V-1240 is very well suited for a wide range of UAVs.
The system is also compatible with several off-the-shelf gimbals. NEO offers high-performance unmanned aerial vehicles, fully integrated with the HySpex Mjolnir V-1240. The UAV is fitted with a standard battery package allowing up to 30 minutes of flight time. All HySpex Mjolnir systems can also be mounted on a tripod and rotation stage for ground use. | Specim FX50
Specim FX50 is the only hyperspectral camera on the market covering the full mid-wave infrared (MWIR) spectral range of 2.7 - 5.3 ?m required, for example, in black plastics sorting. Specim FX50 is a high-speed, accurate, and efficient line-scan hyperspectral camera designed specifically for industrial environments. | Specim AFX17
Specim AFX17 is a NIR hyperspectral imaging solution with an HSI camera, a compact and powerful computer, and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types. | Pika UV
330 - 800 nm
Ultraviolet + Visible
The Pika UV (formerly NUV2) is a hyperspectral camera that scans the Visible and Near Ultraviolet (VIS+NUV) spectral range. An optimized objective lens provides excellent imaging throughout the entire spectral range.
Because halogen lights have low output in much of the NUV, Resonon offers an NUV lighting module to augment illumination for our desktop system.
The Pika UV can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. | SWIR
SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection.
To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal.
Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. |
Description | | Spectral range = 400 - 1000 nm
Spatial pixels = 1240
Spectral channels and sampling = 200 bands @ 3 nm
F-number = F1.8
FOV = 20?
Pixel FOV across/along = 0.27/0.27 mrad
Bit resolution = 12 bit
Noise floor = 2.3 e-
Dynamic range = 4400
Peak SNR (at full resolution) > 180
Max speed (at full resolution) = 285 fps
Power consumption = 50 W
Dimensions (l-w-h) = 250 - 175 - 170 mm
Weight < 4 kg
*Includes IMU/GPS and DAU - <6.5 kg including standard battery | Spectral Range = 2.7 - 5.3 ?m
Spectral resolution (FWHM) = 35 nm
Spectral sampling/pixel = 8.44 nm, Without binning
Spectral bands = 154, With default binning
Numerical aperture = 2.0
Optics magnification = 0.5
Effective pixel size = 30 ?m, At fore lens image plane
Effective slit width = 104 ?m, At fore lens image plane
Effective slit length = 19.2 mm, At fore lens image plane
Dynamic Range = 1600:1 with 1.5 ms exposure time Usable dynamic range / noise
Spatial samples = 640
Bit depth = 16
Maximum frame rate = 380 fps, Full image with default binning
Binning = 1,2,4 spectral and spatial, Default: 2 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI - not the total number of rows included in the mMROI?s.
Pixel operability = Number of operable pixels >99.7%. Allowed clusters: Size 4-8 pixels: <= 12/ Size 9-12 pixels: 2/ Size 13-19 pixels: 1/ Size >19 pixels: 0
Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor material = InSb
Integrated cooler = Stirling Up to 10000 hours
Full well capacity = 5.1 Me-
Read-out modes = IWR / ITR
Optics temperature = TEC-stabilized Default is 20 degrees Celsius
Lens mount = Custom mount
Fore lens options = OLEM43, OLEM23, OLEM17
Field of view = 24 deg, 45 deg, 60 deg
Camera digital data output/control interface = GigE Vision, Custom ethernet
Camera control protocols = GenICam, JSON-RPC
Power input = 24 V DC
Power consumption = Max 90 W, Typical 40 W, During simultaneous cool-down of optics and detector
Connectors = Ethernet/ Aux - 0306423 (09-0428-90-08) Binder 8pin/ Power - 0306627 (LF10WBR-4P) Hirose 4pin Trigger in
IP = IP40
Dimensions (L x W x H) = 280 x 202 x 169 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side.
Weight = 7 kg
Storage temperature = -20 ... +50 oC
Operating temperature = +5 ... +40 oC
Relative humidity = 5% - 95% (non-condensing) | Spectral Range = 900 - 1700 nm
Spectral sampling = 3.5 nm
Spectral resolution = 8.0 nm
Fore lens focal length = 18 mm
Field of view = 38 deg
F/# = 1.7
Spectral bands = 224 Binned by 2
Spatial pixels = 640
Spectral binning options = 1, 2, 4, 8
Spatial binning options = 1, 2
Multiple ROI = User-selectable
Maximum frame rate = 670 fps, Full frame
Dynamic range = 3400
SNR = 1200:1 Binned by 1 spectrally, 1 spatially
Power input = 10-30 VDC Use the supplied battery or drone/gimbal power
Power consumption = 24 W, Typical
Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download
Storage temperature = -20 ? +50C
Operating temperature = +5 ? +40C
Relative humidity = 5 - 90 %, Non-condensing
Drone options = Multirotor with gimbal/Multirotor, no gimbal/Fixed Wing UAV. Any drone with adequate payload capacity can be used
Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used
Gimbal weight = 2.2 - 2.7 kg ,Typical gimbal solution
Operating height = 50 - 150 m. Typical, local limitations apply
GNSS/IMU = Trimble APX-15
GPS Antenna = Trimble AV 14
Internal Memory = 512GB SSD
Dimensions (W x H x L) = 131 x 152 x 202 mm
Weight (without gimbal) = 2.4 kg
Weight (with gimbal = 5.1 kg. Typical gimbal solution | Spectral Range (nm) = 330 - 800
Spectral Channels = 255
Spectral Bandwidth (nm) = 1.8
Spectral Resolution - FWHM (nm) = 2.8
Spatial Pixels = 1500
Max Frame Rate (fps) = 142
f/# = 2.8
InterfaceUSB = 3.0
Dimensions (mm) = 230 x 107 x 85
Weight, w/o lens (kg) = 2.27 | Spectral range = 1000 - 2500 nm
Spectral resolution (FWHM) = 12 nm (30 ?m slit)
Spectral sampling / pixel = 5.6 nm
F/# = F/2.0
Slit width = 30 ?m (50 or 80 ?m optional)
Effective slit length = 9.2 mmRICAL CHARACTERISTICS
Sensor = Cryogenically cooled MCT detector
Spatial pixels = 384
Spectral bands = 288
Pixel size = 24 x 24 ?m
Detector cooling = Stirling, 25 000 h MTTF
Signal-to-noise ratio = 1050:1 (at max. signal level)
Camera output = 16 bit CameraLink
Data cable Length = 5m
Camera control = USB/RS232
Frame grabber = NI-1433
Epix grabber = E4*
Frame rate = 450 fps (maximum full frame)
Exposure time range = 0.1 - 20 ms
Power consumption = Nominal < 50 W
Input voltage = 18 - 36 VNICAL CHARACTERISTICS
Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm
Weight = 14 kg & approx. 5 kg
Body = Anodized aluminium with mounting screwholes
Lens mount = Standard C-mount
Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS
Storage = -20... +50 ?C
Operating = +5... +40 ?C non-condensing |
Reviews
There are no reviews yet.