HySpex SWIR-384
The HySpex SWIR-384 hyperspectral camera is developed for field, laboratory, and airborne applications.
The state of the art MCT sensor with cooling down to 150K yields low background noise, high dynamic range, and exceptional SNR levels. With a max frame rate of 400 fps, combined with an aberration-corrected optical system with high optical throughput (f/2), the data quality, speed, and sensitivity is truly state of the art.
A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters with a spatial resolution of 53 ?m to infinity e.g. airborne remote sensing.
HySpex SWIR-384
SWIR Compare
HySpex SWIR-384
Spectral range = 930 – 2500 nm
Spatial pixels = 384
Spectral channels = 288
Spectral sampling = 5.45 nm
FOV* = 16?
Pixel FOV across/along* = 0.73/0.73 mrad
Bit resolution = 16 bit
Noise floor = 150 e-
Dynamic range = 7500
Peak SNR (at full resolution) > 1100
Max speed (at full resolution) = 400 fps
Power consumption = 30 W
Dimensions (l-w-h) = 38 – 12- 17.5 cm
Weight = 5.7 kg
Camera Interface = CameraLink
*Can be doubled with FOV expander
| Weight | 5.7 kg |
|---|
2 responses to “HySpex SWIR-384”
Leave a Reply
Got something to discuss?
Guest
2024-01-28
I recommend HySpex improve the entire setup and make it more user-friendly. For example, the moving stage is very bulky, and having a long tower makes it impossible to change the height of the camera. It would be great if the height-adjusting handle of the hyperspectral imaging camera was placed on the side of the tower instead of at the top, or if it was motorized. Having adjustable lenses would help too if it does not reduce the data quality.
0
∧ | ∨ - 
Quick Comparison
| HySpex SWIR-384 remove | HySpex Baldur S-640i N remove | Specim FX17 remove | Specim AFX17 remove | Hyspex SWIR-640 remove | Resonon Pika XC2 remove | |
|---|---|---|---|---|---|---|
| Name | HySpex SWIR-384 remove | HySpex Baldur S-640i N remove | Specim FX17 remove | Specim AFX17 remove | Hyspex SWIR-640 remove | Resonon Pika XC2 remove |
| Image |  |  |  |  |  |  |
| Rating | ||||||
| Content | HySpex SWIR-384 The HySpex SWIR-384 hyperspectral camera is developed for field, laboratory, and airborne applications. The state of the art MCT sensor with cooling down to 150K yields low background noise, high dynamic range, and exceptional SNR levels. With a max frame rate of 400 fps, combined with an aberration-corrected optical system with high optical throughput (f/2), the data quality, speed, and sensitivity is truly state of the art. A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters with a spatial resolution of 53 ?m to infinity e.g. airborne remote sensing. | HySpex Baldur S-640i N Baldur S-640i N covers the spectral range from 950-1730nm. All Baldur cameras are Nyquist cameras giving a spectral resolution of 2 spectral bands while capturing 4 times as much light as the classic systems. To ensure that the most information per framerate is provided, the spectral resolution is kept very close to 2 bands. Additionally, the spatial resolution of Baldur S-640i N is better than 1.5 pixels, yielding a very sharp camera. | Specim FX17 Specim FX17 hyperspectral camera operates in the near-infrared region and can literally see the invisible. It can reveal the targets? chemical composition, moisture, and foreign objects that are invisible to the human eye. Specim FX17 can, for example, detect different plastic types for recycling and measure the sugar level of fruits and vegetables and the moisture percentage of baked goods. | Specim AFX17 Specim AFX17 is a NIR hyperspectral imaging solution with an HSI camera, a compact and powerful computer, and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types. | HySpex SWIR-640 The HySpex SWIR-640 hyperspectral camera is developed for field, laboratory, and airborne applications. HySpex SWIR-640 offers high spatial resolution by using a unique MCT sensor. The FPA is cooled to 150K using a sterling cooler, yielding low background noise, high dynamic range, and exceptional SNR levels. The camera offers an aberration-corrected optical system with high optical throughput (f/2.0), the data quality, sensitivity, and resolution is truly state of the art. A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters, with a spatial resolution of 32 ?m, to infinity for e.g. airborne remote sensing. | Pika XC2 400 - 1000 nm High-Precision VNIR The Pika XC2 is a high-resolution hyperspectral camera that covers the Visible + Near-Infrared (VNIR) spectral range. The Pika XC2 has high spatial resolution, best in-class spectral resolution, and excellent imaging quality. Popular in VNIR laboratory applications. The Pika XC2 can be used in our laboratory, and outdoor, and airborne hyperspectral systems, as well as standalone or integrated into your system. |
| Description | Spectral range = 930 - 2500 nm Spatial pixels = 384 Spectral channels = 288 Spectral sampling = 5.45 nm FOV* = 16? Pixel FOV across/along* = 0.73/0.73 mrad Bit resolution = 16 bit Noise floor = 150 e- Dynamic range = 7500 Peak SNR (at full resolution) > 1100 Max speed (at full resolution) = 400 fps Power consumption = 30 W Dimensions (l-w-h) = 38 - 12- 17.5 cm Weight = 5.7 kg Camera Interface = CameraLink *Can be doubled with FOV expander | Spectral Range = 950 - 1730 nm Spectral bands = 232 Max speed* = 500 fps Spectral sampling = 3.36 nm Spectral FWHM <2 bands Spatial FWHM <1.5 pixels Spatial pixels = 640 Keystone <20% of a pixel Smile <20% of band FOV = 16? / 40? Bit resolution = 12 bit Noise floor = HG:8.5/MG:32/LG:270 e- Peak SNR = HG:150/MG:275/LG:800 Dynamic range = HG:2650/MG:2360/LG:2360 ROI* = All bands can be selected/deselected individually External trigger options = LVDS, 5V/12V/24V TTL Dimensions (l-w-h) = 364 - 105 - 153 mm Camera Interface = GigE * Reducing the number of spectral channels with ROI will proportionally increase the max framerate | Spectral Range = 900-1700 nm Spectral resolution (FWHM) = 8 nm (mean) Spectral sampling/pixel = 3.5 nm Spectral bands = 224 With default binning Numerical aperture = 1.7 With default lens Optics magnification = 0.80 Effective pixel size = 18.7 ?m At fore lens image plane Effective slit width Physical width = 42?m. Projection on sensor = 32 ?m (M=1.3) At fore lens image plane Effective slit length = 12.0 mm At fore lens image plane SNR @ max. signal = 1000:1 Bit depth = 12 Maximum frame rate = 670 (FX17)/ 527 (FX17e) FPS full range Binning = 1,2,4 spectral and spatial Default: 1 spectral x 1 spatial ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI and the total number of rows included in the mMROI?s. Pixel operability = 99.5%. Allowed clusters: Size 2-6 pixels: N/A/ Size 7-12 pixels: ? 6/ Size 13-19 pixels: ? 2/ Size 20-35 pixels: ? 1/ Size > 35: 0 Image corrections = Non uniformity correction/ Bad pixel replacement/ Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations Sensor material = InGaAs Sensor cooling = TEC Full well capacity = 1.44 Me- Read-out modes = IWR / ITR Optics temperature = Passive Default is 20 degrees Celsius Lens mount = Custom mount Fore lens FOV options = 12 deg/38 deg (default)/53 deg/66 deg/75 deg/90 deg. Only the default lens is specifically designed for FX17. With other lens options, optical parameters may vary. Camera digital data output/control interface = GigE Vision, CameraLink Camera control protocols = GenICam, ASCII Power input = 12 V DC (+-10%) Power consumption = Max 24 W Connectors = Industrial Ethernet OR CameraLink (standard MDR 26-pin). Power - Fischer 12pin DBPLU1031Z012|130G IP = IP52 Dimensions (L x W x H) = 150 x 75 x 85 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight = 1.56 kg Storage temperature = -20 ... +50 oC (non-condensing) Operating temperature = +5 ... +40 oC (non-condensing) Relative humidity = 5% - 95% (non-condensing) | Spectral Range = 900 - 1700 nm Spectral sampling = 3.5 nm Spectral resolution = 8.0 nm Fore lens focal length = 18 mm Field of view = 38 deg F/# = 1.7 Spectral bands = 224 Binned by 2 Spatial pixels = 640 Spectral binning options = 1, 2, 4, 8 Spatial binning options = 1, 2 Multiple ROI = User-selectable Maximum frame rate = 670 fps, Full frame Dynamic range = 3400 SNR = 1200:1 Binned by 1 spectrally, 1 spatially Power input = 10-30 VDC Use the supplied battery or drone/gimbal power Power consumption = 24 W, Typical Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download Storage temperature = -20 ? +50C Operating temperature = +5 ? +40C Relative humidity = 5 - 90 %, Non-condensing Drone options = Multirotor with gimbal/Multirotor, no gimbal/Fixed Wing UAV. Any drone with adequate payload capacity can be used Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used Gimbal weight = 2.2 - 2.7 kg ,Typical gimbal solution Operating height = 50 - 150 m. Typical, local limitations apply GNSS/IMU = Trimble APX-15 GPS Antenna = Trimble AV 14 Internal Memory = 512GB SSD Dimensions (W x H x L) = 131 x 152 x 202 mm Weight (without gimbal) = 2.4 kg Weight (with gimbal = 5.1 kg. Typical gimbal solution | Spectral range = 960 - 2500 nm Spatial pixels = 640 Spectral channels = 360 Spectral sampling = 4.38 nm FOV* = 16? Pixel FOV across/along* = 0.44/0.44 mrad Bit resolution = 16 bit Noise floor = 80 e- Dynamic range = 7500 Peak SNR (at full resolution) > 800 Max speed (at full resolution) = 235 fps Power consumption = 10 W Dimensions (l-w-h) = 36 - 11- 15 cm Weight = 4.1 kg Camera Interface = CameraLink *Can be doubled with FOV expander | Spectral Range (nm) = 400 - 1000 Spectral Channels = 447 Spectral Bandwidth (nm) = 1.3 Spectral Resolution - FWHM (nm) = 1.9 Spatial Pixels = 1600 Max Frame Rate (fps) = 165 f/# = 2.4 Interface = USB 3.0 Dimensions (mm) = 265 x 106 x 75 Weight, w/o lens (kg) = 2.51 |
The HySpex SWIR 384 camera offers a broad spectral range of 950 nm to 2500 nm, allowing for high quality imaging of a wide variety of samples. The camera provides excellent image quality, and it comes with Ground Software that enables users to control the imaging process, adjust lights, and see images live. The software is free and user friendly, making it easy to use for a range of applications. However, it’s important to note that the Ground software does not perform white and dark calibration, nor data analysis. For these purposes, a separate software needs to be purchased.
We purchased this shortwave infrared (SWIR) hyperspectral imaging camera in 2019. Since then, the camera has broken a few times, mainly failing to reduce the temperature of the camera to the operating temperature. HySpex attributed this to the part supplier (which I believe is right). While a permanent repair is yet to be found, HySpex’s customer service was exceptionally good and did their best to keep my lab going. They once sent a technician from Norway (to Australia) to service the camera and increase its lifespan until they find a permanent repair.
In terms of application ease, the camera holder benchtop lit is bulky, and adjusting the camera focus is done physically by moving the camera up and down rather than using an adjustable lens or a powered camera tower. Adjusting the camera height is an inconvenience, as we need to turn a handle ten of times to move it up and down a few centimetres. Adding to that, the handle is placed at the top of the camera tower. Placing the camera on the bench means that the tower is somewhere close to the ceiling, and we need to have a ladder to adjust the camera height.
There are a few options for lenses to choose from. I am using a 30 cm lens, which stands 30 cm above the samples and measures 10 cm width of the stage. I also have a “microscopic lens.” This lens does not actually magnify anything, but the pixel size is very fine (ca. 0.05 mm). The “microscopic lens” measures the 2 cm width of the stage. There is a 1 m lese that measures up to 30 cm width. The Hyspex SWIR 384 measures 384 pixel per line.
Furthermore, because the camera offers a broad spectral range with relatively high spectral resolution (ca. 5.45 nm), leading to measuring 288 wavelengths, the imaging speed is not very high (yet good for research). As far as I am aware, it’s not possible to turn off some wavelengths to increase the imaging speed. This is something you need to consider if imaging speed is important for your application. This is not a disadvantage for me since I use it for research (chemometrics, food quality monitoring, classification, non destructive analysis), and I prioritise better quality data over faster imaging speed.
Overall, I am very happy with the quality of the images and the customer service, and I think the HySpex SWIR 384 is an excellent option for my applications (research). It’s important to consider the drawbacks, such as the inconvenience of adjusting the camera height and its high price. However, the excellent image quality, broad spectral range, and HySpex’s exceptional customer service make it a worthwhile investment for many applications.