| Content | The Gamechanger: World's smallest HSI Snapshot Camera
Cubert?s smallest ever hyperspectral imaging camera is also its most affordable, to a price that can easily compete against RGB and multispectral cameras. By downsizing the fundamental light field technology of the ULTRIS 20, we have created a hyperspectral video camera featuring a 5 MP sensor that is just 30 x 30 x 50 mm and weighs only 120 g.
This latest addition to the ULTRIS family addresses the needs of industry and researchers alike for a robust and lightweight camera that can fit into every lab or production area, physically and fiscally. It is small enough to fit into any industrial process system, powerful enough to fill medical imaging requirements and fast enough to record complete non-scanning snapshot datacubes at 15Hz. The ULTRIS 5 HFR is the 10 GigE version of our standard ULTRIS 5. The camera properties are the same, featuring a resolution of 290 x 275 pixel and 51 spectral bands covering 450-850 nm. Equipped with a 10 Gigabit Ethernet port, the integrated Sony IMX250 sensor can unleash its full potential and can deliver up to 75 Hz while retaining the typical 12 bit depth, which is often needed for hyperspectral applications. | SWIR
SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection.
To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal.
Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. | Specim AFX10
Specim AFX10 is a VNIR hyperspectral imaging solution with an HSI camera, a small and powerful computer and a high-end GNSS/IMU unit in a compact enclosure that can be installed on multiple drone types. | HySpex Mjolnir VS-620
For applications requiring low mass, combined with high-performance specifications and scientific grade data quality on the full VNIR-SWIR range, HySpex Mjolnir VS-620 is an ideal solution. Sharing the onboard data acquisition unit and navigation system, HySpex Mjolnir VS-620 is both space-efficient and cost-effective.
The VNIR and SWIR optical axis are coaligned in the along-track direction, assuring perfect coregistration in the flight direction. In addition to the high-quality hyperspectral data cube, covering the spectral range from 400 - 2500 nm, with 490 bands, double resolution data in the VNIR range is always readily available. With smile and keystone less than 0.1 pixels for each spectral range, the merged Mjolnir VS-620 data product will have coregistration/keystone better than 0.2 pixels for the full VNIR-SWIR range. | Specim FX17
Specim FX17 hyperspectral camera operates in the near-infrared region and can literally see the invisible. It can reveal the targets? chemical composition, moisture, and foreign objects that are invisible to the human eye. Specim FX17 can, for example, detect different plastic types for recycling and measure the sugar level of fruits and vegetables and the moisture percentage of baked goods. | Specim FX10
Specim FX10 is a line-scan hyperspectral camera that operates in the visible and near-infrared (VNIR) region. It is an excellent tool for industrial and scientific applications.
The Specim FX10 operates in the 400-1000 nm region, and the color-optimized Specim FX10c in the 400-780 nm region. |
| Description | Spectral Range = 450 - 850 nm
Number of Bands = 51
FWHM = 26 nm @ 532 nm
Max Resolution = 290 x 275 pixel
Weight = Standard version: 120 g/ HFR version: 465 g
Dimensions = Standard version: 29 x 29 x 49 mm/ HFR version: 60 x 60 x 99.4 mm
Technology = Light Field
Sensor(s) = 5 MP
Spectral Sampling = 8 nm
Wavelength Error < 8 nm
Total Spectra / Image = 79 750
Total Data Points (Data Points / Cube) = 3 million
Data Depths = 12 Bit
Readout = Global shutter
Max Frame Rate = Standard version: 15 Hz/ HFR version: 75 Hz
Integration Time = 0.1-1000 ms
Field of View (FOV) = 15?
Power Consumption = 3 W | Spectral range = 1000 - 2500 nm
Spectral resolution (FWHM) = 12 nm (30 ?m slit)
Spectral sampling / pixel = 5.6 nm
F/# = F/2.0
Slit width = 30 ?m (50 or 80 ?m optional)
Effective slit length = 9.2 mmRICAL CHARACTERISTICS
Sensor = Cryogenically cooled MCT detector
Spatial pixels = 384
Spectral bands = 288
Pixel size = 24 x 24 ?m
Detector cooling = Stirling, 25 000 h MTTF
Signal-to-noise ratio = 1050:1 (at max. signal level)
Camera output = 16 bit CameraLink
Data cable Length = 5m
Camera control = USB/RS232
Frame grabber = NI-1433
Epix grabber = E4*
Frame rate = 450 fps (maximum full frame)
Exposure time range = 0.1 - 20 ms
Power consumption = Nominal < 50 W
Input voltage = 18 - 36 VNICAL CHARACTERISTICS
Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm
Weight = 14 kg & approx. 5 kg
Body = Anodized aluminium with mounting screwholes
Lens mount = Standard C-mount
Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS
Storage = -20... +50 ?C
Operating = +5... +40 ?C non-condensing | Spectral Range = 400 - 1000 nm
Spectral sampling = 2.68 nm
Spectral resolution = 5.5 nm
Fore lens focal length = 15 mm
Field of view = 38 deg
F/# = 1.7
Spectral bands = 224 Binned by 2
Spatial pixels = 1024
Spectral binning options = 2, 4, 8
Spatial binning options = 1, 2
Multiple ROI = User-selectable
Maximum frame rate = 330 fps Full frame
Dynamic range = 1420
SNR = 400:1 2 spectral binning, 1 spatial binning
Power input = 10-30 VDC. Use separate battery or UAV/gimbal power
Power consumption = 17 W Typical
Connectors = ANT, DC IN, ETH GPS Antenna, Power In, Web UI / Data download
Storage temperature = -20 ? +50C
Operating temperature = +5 ? +40C
Relative humidity = 5 - 90 %. Non-condensing
Drone options = Multirotor with gimbal/ Multirotor, no gimbal/ Fixed Wing UAV. Any drone with adequate payload capacity can be used.
Gimbal = Optimized for MoVI pro. Other suitable gimbals may also be used
Gimbal weight = 2.2 - 2.7 kg. Typical gimbal solution
Operating height = 15 - 150 m. Typical, local limitations may apply
GNSS/IMU = Trimble APX-15
GPS Antenna = Trimble AV 14
Internal Memory = 512GB SSD
Dimensions (W x H x L) = 131 x 152 x 202 mm
Weight (without gimbal) = 2.1 kg
Weight (with gimbal) = 4.8 kg. Typical gimbal solution | | Spectral Range = 900-1700 nm
Spectral resolution (FWHM) = 8 nm (mean)
Spectral sampling/pixel = 3.5 nm
Spectral bands = 224 With default binning
Numerical aperture = 1.7 With default lens
Optics magnification = 0.80
Effective pixel size = 18.7 ?m At fore lens image plane
Effective slit width Physical width = 42?m.
Projection on sensor = 32 ?m (M=1.3) At fore lens image plane
Effective slit length = 12.0 mm At fore lens image plane
SNR @ max. signal = 1000:1
Bit depth = 12
Maximum frame rate = 670 (FX17)/ 527 (FX17e) FPS full range
Binning = 1,2,4 spectral and spatial Default: 1 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI and the total number of rows included in the mMROI?s.
Pixel operability = 99.5%. Allowed clusters: Size 2-6 pixels: N/A/ Size 7-12 pixels: ? 6/ Size 13-19 pixels: ? 2/ Size 20-35 pixels: ? 1/ Size > 35: 0
Image corrections = Non uniformity correction/ Bad pixel replacement/ Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor material = InGaAs
Sensor cooling = TEC
Full well capacity = 1.44 Me-
Read-out modes = IWR / ITR
Optics temperature = Passive Default is 20 degrees Celsius
Lens mount = Custom mount
Fore lens FOV options = 12 deg/38 deg (default)/53 deg/66 deg/75 deg/90 deg. Only the default lens is specifically designed for FX17. With other lens options, optical parameters may vary.
Camera digital data output/control interface = GigE Vision, CameraLink
Camera control protocols = GenICam, ASCII
Power input = 12 V DC (+-10%)
Power consumption = Max 24 W
Connectors = Industrial Ethernet OR CameraLink (standard MDR 26-pin). Power - Fischer 12pin DBPLU1031Z012|130G
IP = IP52
Dimensions (L x W x H) = 150 x 75 x 85 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side.
Weight = 1.56 kg
Storage temperature = -20 ... +50 oC (non-condensing)
Operating temperature = +5 ... +40 oC (non-condensing)
Relative humidity = 5% - 95% (non-condensing) | Spectral Range = 400-1000 / 400-780 (c-version)
Spectral resolution (FWHM) = 5.5 nm (mean)
Spectral sampling/pixel = 2.7 nm, With default binning
Spectral bands = 224 / 140 (c-version), With default binning
Numerical aperture = 1.7, With default lens
Optics magnification = 0.80
Effective pixel size = 19.9x9.97 ?m, At fore lens image plane
Effective slit width = 42 ?m, At fore lens image plane
Effective slit length = 10.2 mm, At fore lens image plane
SNR @ max. signal = 420 : 1
Spatial samples = 1024
Bit depth = 12
Maximum frame rate = 327 FPS full range / 514 FPS full range (c-version)
Binning = 2,4,8 spectral and spatial Default: 2 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI?s
Pixel operability = 99.993%
Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor material = CMOS
Sensor cooling = Passive
Full well capacity = 90 ke-
Read-out modes = IWR / ITR
Optics temperature = Passive
Lens mount = Custom mount
Fore lens FOV options = 12 deg/ 38 deg (default)/ 47 deg/ 51 deg/ 83 deg. Only the default lens is specifically designed for FX10. With other lens options, optical parameters may vary.
Camera digital data output/control interface = GigE Vision, CameraLink
Camera control protocols = GenICam, ASCII
Power input = 12 V DC (+-10%)
Power consumption = Max 4 W
Connectors = Industrial Ethernet OR CameraLink 26-pin, 0.5?
MDR
IP = IP52
Dimensions (L x W x H) = 150 x 85 x 71 mm Mounting surface option on three sides.
Mounting kit adds 24 mm distance on mounting side.
Weight = 1.3 kg
Storage temperature = -20 ... +50?C (non-condensing)
Operating temperature = +5 ? +40?C (non-condensing)
Relative humidity = 5% - 95% (non-condensing) |
Reviews
There are no reviews yet.