OCI?-M multispectral imager has 8-band push-broom multispectral camera to acquire from visible to near-infrared (VIS-NIR) imaging data, with SuperSpeed USB 3.0 interface. It features ultra-compactness and light weight with outstanding spectral resolution. Fast imaging and innovations in hardware and algorithms enable the OCITM – M completing a scan within 5 seconds and producing a hyperspectral data cube in 10 seconds. We also provide ready-to-fly package, an ultimate aerial multispectral imaging solution. Extreme compactness with uncompromised performance, automatic operation and data processing makes the OCI – M-UAV achieving a straightforward system for applications such as precision agriculture and remote sensing, geological survey, security/defense, oceanography, and anti-counterfeiting.
BaySpec OCI-M
VNIR Compare
BaySpec OCI-M
Spectral Range = 400 – 1000 nm
Number of Spectral Bands = 8
Spectral Bandwidth = 5 – 7 nm FWHM
Frame Rate = 120 frames/sec
Dimension = 3 x 3 x 3 cm3
Weight = 45.3 g
Quick Comparison
| BaySpec OCI-M remove | Specim FX17 remove | Specim FX10+ remove | Resonon Pika IR+ remove | Hyspex SWIR-640 remove | Resonon Pika IR-L remove | |
|---|---|---|---|---|---|---|
| Name | BaySpec OCI-M remove | Specim FX17 remove | Specim FX10+ remove | Resonon Pika IR+ remove | Hyspex SWIR-640 remove | Resonon Pika IR-L remove |
| Image |  |  |  |  |  |  |
| Rating | ||||||
| Content | OCI?-M multispectral imager has 8-band push-broom multispectral camera to acquire from visible to near-infrared (VIS-NIR) imaging data, with SuperSpeed USB 3.0 interface. It features ultra-compactness and light weight with outstanding spectral resolution. Fast imaging and innovations in hardware and algorithms enable the OCITM - M completing a scan within 5 seconds and producing a hyperspectral data cube in 10 seconds. We also provide ready-to-fly package, an ultimate aerial multispectral imaging solution. Extreme compactness with uncompromised performance, automatic operation and data processing makes the OCI - M-UAV achieving a straightforward system for applications such as precision agriculture and remote sensing, geological survey, security/defense, oceanography, and anti-counterfeiting. | Specim FX17 Specim FX17 hyperspectral camera operates in the near-infrared region and can literally see the invisible. It can reveal the targets? chemical composition, moisture, and foreign objects that are invisible to the human eye. Specim FX17 can, for example, detect different plastic types for recycling and measure the sugar level of fruits and vegetables and the moisture percentage of baked goods. | Specim FX10+ The Specim FX10+ is a high-speed line-scan hyperspectral camera optimized for applications requiring fast imaging. Its high resolution ensures accurate and detailed imaging at a rapid pace. Specim FX10+ operates in the visible and near-infrared (VNIR) region from 400 to 1000 nm. | Pika IR+ 900 - 1700 nm High-Precision Infrared The Pika IR+ (formerly Pika NIR-640) is a high-performance hyperspectral camera that covers the Near-Infrared (NIR) spectral range. It has high spatial and spectral resolutions and is often used for infrared laboratory applications. The Pika IR+ can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. | HySpex SWIR-640 The HySpex SWIR-640 hyperspectral camera is developed for field, laboratory, and airborne applications. HySpex SWIR-640 offers high spatial resolution by using a unique MCT sensor. The FPA is cooled to 150K using a sterling cooler, yielding low background noise, high dynamic range, and exceptional SNR levels. The camera offers an aberration-corrected optical system with high optical throughput (f/2.0), the data quality, sensitivity, and resolution is truly state of the art. A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters, with a spatial resolution of 32 ?m, to infinity for e.g. airborne remote sensing. | Pika IR-L 925 - 1700 nm Lightweight Infrared The Pika IR-L is a lightweight and compact Near-Infrared (925-1,700 nm) imager. The small size and mass make it well suited for airborne applications, where it can provide invisible to the naked-eye contrast of outdoor features. For a compact, lightweight Visible light spectral range option, please see the Pika L. For a higher spectral and spatial resolution version of the Pika IR-L, please see the Pika IR-L+ imager. |
| Description | Spectral Range = 400 - 1000 nm Number of Spectral Bands = 8 Spectral Bandwidth = 5 - 7 nm FWHM Frame Rate = 120 frames/sec Dimension = 3 x 3 x 3 cm3 Weight = 45.3 g | Spectral Range = 900-1700 nm Spectral resolution (FWHM) = 8 nm (mean) Spectral sampling/pixel = 3.5 nm Spectral bands = 224 With default binning Numerical aperture = 1.7 With default lens Optics magnification = 0.80 Effective pixel size = 18.7 ?m At fore lens image plane Effective slit width Physical width = 42?m. Projection on sensor = 32 ?m (M=1.3) At fore lens image plane Effective slit length = 12.0 mm At fore lens image plane SNR @ max. signal = 1000:1 Bit depth = 12 Maximum frame rate = 670 (FX17)/ 527 (FX17e) FPS full range Binning = 1,2,4 spectral and spatial Default: 1 spectral x 1 spatial ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI and the total number of rows included in the mMROI?s. Pixel operability = 99.5%. Allowed clusters: Size 2-6 pixels: N/A/ Size 7-12 pixels: ? 6/ Size 13-19 pixels: ? 2/ Size 20-35 pixels: ? 1/ Size > 35: 0 Image corrections = Non uniformity correction/ Bad pixel replacement/ Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations Sensor material = InGaAs Sensor cooling = TEC Full well capacity = 1.44 Me- Read-out modes = IWR / ITR Optics temperature = Passive Default is 20 degrees Celsius Lens mount = Custom mount Fore lens FOV options = 12 deg/38 deg (default)/53 deg/66 deg/75 deg/90 deg. Only the default lens is specifically designed for FX17. With other lens options, optical parameters may vary. Camera digital data output/control interface = GigE Vision, CameraLink Camera control protocols = GenICam, ASCII Power input = 12 V DC (+-10%) Power consumption = Max 24 W Connectors = Industrial Ethernet OR CameraLink (standard MDR 26-pin). Power - Fischer 12pin DBPLU1031Z012|130G IP = IP52 Dimensions (L x W x H) = 150 x 75 x 85 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight = 1.56 kg Storage temperature = -20 ... +50 oC (non-condensing) Operating temperature = +5 ... +40 oC (non-condensing) Relative humidity = 5% - 95% (non-condensing) | Spectral Range = 400-1000 nm Spectral resolution (FWHM) = 15 nm, Typical mean Spectral sampling/pixel = 6.3 nm, With default binning Spectral bands = 100, With default binning Numerical aperture = 1.7, With default lens Optics magnification = 0.80 Effective pixel size = 19.9x9.97 ?m, At fore lens image plane Effective slit width = 42 ?m, At fore lens image plane Effective slit length = 10.2 mm, At fore lens image plane SNR @ max. signal = 420 : 1 Spatial samples = 1024 Bit depth = 12 Maximum frame rate = 705 FPS full range. With 2-spectral binning (Bands: Max FPS) = 1:9900/5:6500/20:2800/35:1813/70:985 Binning = 2,4,8 spectral and spatial, Default: 2 spectral x 1 spatial ROI = Freely selectable multiple bands of interest, Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI?s Pixel operability = 99.993% Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). AIE: Unified spectral calibration + corrected smile and keystone aberrations. One point NUC Sensor material = CMOS Sensor cooling = Passive Full well capacity = 90 ke- Read-out modes = IWR / ITR Optics temperature = Passive Lens mount = Custom mount Fore lens FOV options:12 deg/38 deg (default)/47 deg/51 deg/83 deg. Only the default lens is specifically designed for FX10. With other lens options, optical parameters may vary. Camera digital data output/control interface = GigE Vision Camera control protocols = GenICam, ASCII Power input = 12 V DC (+-10%) Power consumption = Max 4 W Connectors = Industrial Ethernet IP = IP52 Dimensions (L x W x H) 150 x 85 x 71 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight 1.3 kg Storage temperature = -20 ... +50?C (non-condensing) Operating temperature = +5 ? +40?C (non-condensing) Relative humidity = 5% - 95% (non-condensing) | Spectral Range (nm) = 900 - 1700 Spectral Channels = 336 Spectral Bandwidth (nm) = 2.4 Spectral Resolution - FWHM (nm) = 5.6 Spatial Pixels = 640 Max Frame Rate (fps) = 240 f/# = 1.8 Interface = GigE Dimensions (mm) = 264 x 115 x 88 Weight, w/o lens (kg) = 2.95 | Spectral range = 960 - 2500 nm Spatial pixels = 640 Spectral channels = 360 Spectral sampling = 4.38 nm FOV* = 16? Pixel FOV across/along* = 0.44/0.44 mrad Bit resolution = 16 bit Noise floor = 80 e- Dynamic range = 7500 Peak SNR (at full resolution) > 800 Max speed (at full resolution) = 235 fps Power consumption = 10 W Dimensions (l-w-h) = 36 - 11- 15 cm Weight = 4.1 kg Camera Interface = CameraLink *Can be doubled with FOV expander | Spectral Range (nm) = 925 - 1700 Spectral Channels = 236 Spectral Bandwidth (nm) = 3.3 Spectral Resolution - FWHM (nm) = 5.9 Spatial Pixels = 320 Max Frame Rate (fps) = 364 f/# = 1.8 Interface = GigE Dimensions (mm) = 210 x 68 x 63 Weight, w/o lens (kg) = 1.01 |
Leave a Reply