| Content | Very Compact Multispectral Cameras CMS4 Multispetral cameras are specially designed to allow high integration of VIS/NIR multispectral systems. These lightweight (less than 170g) and very small footprint (52x62x40mm) cameras split the image into 8 spectral bands plus 1 B&W channel. Made by hybridization of a custom Bayer-like mosaic filter on a commercial 4.2 MPixel CMOS Sensor, they allow extracting the spectrum on each point of an image. SILIOS offers three different CMS4 cameras (CMS4-C, CMS4-V and CMS4-S) to address a wide spectrum of applications. | Specim FX10+
The Specim FX10+ is a high-speed line-scan hyperspectral camera optimized for applications requiring fast imaging. Its high resolution ensures accurate and detailed imaging at a rapid pace. Specim FX10+ operates in the visible and near-infrared (VNIR) region from 400 to 1000 nm. | SWIR
SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection.
To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal.
Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. | Pika L
400 - 1000 nm
Lightweight, Compact VNIR
The Pika L is a lightweight, compact hyperspectral camera that covers the Visible + Near-Infrared (VNIR) spectral range. It is our most popular imager for remote sensing applications.
The Pika L can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. | Pika XC2
400 - 1000 nm
High-Precision VNIR
The Pika XC2 is a high-resolution hyperspectral camera that covers the Visible + Near-Infrared (VNIR) spectral range. The Pika XC2 has high spatial resolution, best in-class spectral resolution, and excellent imaging quality. Popular in VNIR laboratory applications.
The Pika XC2 can be used in our laboratory, and outdoor, and airborne hyperspectral systems, as well as standalone or integrated into your system. | HySpex Baldur S-384 N
Baldur S-384 N covers the spectral range from 960-2500 nm.
All Baldur cameras are Nyquist cameras giving a spectral resolution of 2 spectral bands while capturing 4 times as much light as the classic systems. To ensure that the most information per framerate is provided, the spectral resolution is kept very close to 2 bands. Additionally, the spatial resolution of Baldur S-384 N is better than 1.5 pixels, yielding a very sharp camera. |
| Description | Spectral range = 650 - 930 nm
Band width (FWHM avg) = 40 nm
Macropixel configuration = 3 x 3 (8 color bands + 1 B&W)
Array type = CMOS
Optical Interface = CS-mount (C-mount compatible with additional C-ring)
Resolution (raw picture) = 2048 (H) x 2048 (V)
Resolution (spectral pictures) = 682 (H) x 682 (V)
Pixel pitch = 5.5 ?m
Maximum frame rate = 65 Hz (camera acquisition) / 20 Hz (COLOR SHADES Lab)
Exposure time range = 100 ?s to 5 s
ADC = 10-bit
Camera control = USB 3.0
Digital output = 10-bit USB 3.0
Power supply = USB 3.0
Dimension (W x H x L) = 52 x 62 x 40 mm
Weight (camera head) = 180 g | Spectral Range = 400-1000 nm
Spectral resolution (FWHM) = 15 nm, Typical mean
Spectral sampling/pixel = 6.3 nm, With default binning
Spectral bands = 100, With default binning
Numerical aperture = 1.7, With default lens
Optics magnification = 0.80
Effective pixel size = 19.9x9.97 ?m, At fore lens image plane
Effective slit width = 42 ?m, At fore lens image plane
Effective slit length = 10.2 mm, At fore lens image plane
SNR @ max. signal = 420 : 1
Spatial samples = 1024
Bit depth = 12
Maximum frame rate = 705 FPS full range. With 2-spectral binning (Bands: Max FPS) = 1:9900/5:6500/20:2800/35:1813/70:985
Binning = 2,4,8 spectral and spatial, Default: 2 spectral x 1 spatial
ROI = Freely selectable multiple bands of interest, Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI?s
Pixel operability = 99.993%
Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). AIE: Unified spectral calibration + corrected smile and keystone aberrations. One point NUC
Sensor material = CMOS
Sensor cooling = Passive
Full well capacity = 90 ke-
Read-out modes = IWR / ITR
Optics temperature = Passive
Lens mount = Custom mount
Fore lens FOV options:12 deg/38 deg (default)/47 deg/51 deg/83 deg. Only the default lens is specifically designed for FX10. With other lens options, optical parameters may vary.
Camera digital data output/control interface = GigE Vision
Camera control protocols = GenICam, ASCII
Power input = 12 V DC (+-10%)
Power consumption = Max 4 W
Connectors = Industrial Ethernet
IP = IP52
Dimensions (L x W x H) 150 x 85 x 71 mm Mounting surface option on three sides.
Mounting kit adds 24 mm distance on mounting side.
Weight 1.3 kg
Storage temperature = -20 ... +50?C (non-condensing)
Operating temperature = +5 ? +40?C (non-condensing)
Relative humidity = 5% - 95% (non-condensing) | Spectral range = 1000 - 2500 nm
Spectral resolution (FWHM) = 12 nm (30 ?m slit)
Spectral sampling / pixel = 5.6 nm
F/# = F/2.0
Slit width = 30 ?m (50 or 80 ?m optional)
Effective slit length = 9.2 mmRICAL CHARACTERISTICS
Sensor = Cryogenically cooled MCT detector
Spatial pixels = 384
Spectral bands = 288
Pixel size = 24 x 24 ?m
Detector cooling = Stirling, 25 000 h MTTF
Signal-to-noise ratio = 1050:1 (at max. signal level)
Camera output = 16 bit CameraLink
Data cable Length = 5m
Camera control = USB/RS232
Frame grabber = NI-1433
Epix grabber = E4*
Frame rate = 450 fps (maximum full frame)
Exposure time range = 0.1 - 20 ms
Power consumption = Nominal < 50 W
Input voltage = 18 - 36 VNICAL CHARACTERISTICS
Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm
Weight = 14 kg & approx. 5 kg
Body = Anodized aluminium with mounting screwholes
Lens mount = Standard C-mount
Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS
Storage = -20... +50 ?C
Operating = +5... +40 ?C non-condensing | Spectral Range (nm) = 400 - 1000
Spectral Channels = 281
Spectral Bandwidth (nm) = 2.1
Spectral Resolution - FWHM (nm) = 3.3
Spatial Pixels = 900
Max Frame Rate (fps) = 249
f/# = 2.4
Interface = USB 3.0
Dimensions (mm) = 115 x 104 x 66
Weight, w/o lens (kg) = 0.64 | Spectral Range (nm) = 400 - 1000
Spectral Channels = 447
Spectral Bandwidth (nm) = 1.3
Spectral Resolution - FWHM (nm) = 1.9
Spatial Pixels = 1600
Max Frame Rate (fps) = 165
f/# = 2.4
Interface = USB 3.0
Dimensions (mm) = 265 x 106 x 75
Weight, w/o lens (kg) = 2.51 | Spectral Range = 960 - 2500nm
Spectral bands = 288
Max speed* = 500 fps
Spectral sampling = 5.45 nm
Spectral FWHM <2 bands
Spatial FWHM <1.3 pixels
Spatial pixels = 384
Keystone <15% of a pixel
Smile <15% of band
FOV = 16? / 40?
Bit resolution = 16 bit
Noise floor = 150 e-
Peak SNR >1100
Dynamic range = 7500
ROI* = All bands can be selected/deselected individually
External trigger options LVDS, 5V/12V/24V TTL
Dimensions (l-w-h) = 368 - 131 - 175 mm
Camera Interface = CameraLink
* Reducing the number of spectral channels with ROI will proportionally increase the max framerate |
Leave a Reply