Haip BlackBird V2 VNIR Sensor

Wavelength range = 500-1000 nm
Number of bands = 100
Spectral resolution = 5 nm
Spectral sampling = 5 nm
Resolution RGB = 1800 x 1800 px
Resolution Spectral = 540 x 540 px
Field of View = HSI/RGB 33?/37?
Detector = CMOS
Sensor size = 2 Megapixel
Radiometric resolution = 10 bit
Integration time (cube) < 3 seconds Data size (raw) = 100 MB/ Data cube Connection = DJI Skyport 2.0 connector Operation temperature = -10 - +50?C Protection class = IP 40 Power consumption = 13.6 V DC / 2 A Size = 80 x 60 x 90 mm Data storage = 1 USB-A stick (supports 256 GB) Weight (incl. Gimbal) = 790 g

SKU: Haip BlackBird V2 VNIR Sensor Category: VNIR Tag: Mounted

Compare

HAIP Solutions BlackBird V2 VNIR Sensor is the easiest way to take hyperspectral images on drones. It is specifically designed for the use with DJI drones from the Matrice 200 & 300 series. The worldwide first hyperspectral Plug and Play solution for drones. Ready to fly and measure. BlackBird V2 has two separate sensors. One HSI sensor and a separate RGB camera for high quality live stream on the remote controller. The hyperspectral sensor provides a native image resolution of 540×540 pixels with 100 spectral channels, continuously covering the wavelength range from 500 nm to1000 nm.
BlackBird is based on a hyperspectral line scanner, but there is no need to move the sensor during image acquisition to get a full hyperspectral data cube. The internal movement unit creates a 2D image in under 3 seconds. If needed there is also a line-scan mode, where the movement to create an image comes from the drone. These two modes can be switched directly on the remote controller. Camera control and power support works via DJIs Sky port 2.0 connector and the remote controller. Through the DJI Pilot App you get features such as remote camera trigger, RGB livestream and flight-planning support. To simplify the work even more, the first results from the camera can be viewed directly on the remote controller and, for example, the exposure can be checked. Data is stored on an external, removable USB-A data storage to minimise downtime during data transfer on the ground. Additional preprocessing on camera is possible, as the camera has a build in dedicated GPU.

Quick Comparison

	Haip BlackBird V2 VNIR Sensor remove	HySpex Baldur S-640i N remove	Resonon Pika UV remove	Specim FX17 remove	Specim Fenix remove	HySpex Mjolnir V-1240 remove
Name	Haip BlackBird V2 VNIR Sensor remove	HySpex Baldur S-640i N remove	Resonon Pika UV remove	Specim FX17 remove	Specim Fenix remove	HySpex Mjolnir V-1240 remove
Image
Rating	Rated 0 out of 5	Rated 0 out of 5	Rated 0 out of 5	Rated 0 out of 5	Rated 0 out of 5	Rated 0 out of 5
Content	HAIP Solutions BlackBird V2 VNIR Sensor is the easiest way to take hyperspectral images on drones. It is specifically designed for the use with DJI drones from the Matrice 200 & 300 series. The worldwide first hyperspectral Plug and Play solution for drones. Ready to fly and measure. BlackBird V2 has two separate sensors. One HSI sensor and a separate RGB camera for high quality live stream on the remote controller. The hyperspectral sensor provides a native image resolution of 540x540 pixels with 100 spectral channels, continuously covering the wavelength range from 500 nm to1000 nm. BlackBird is based on a hyperspectral line scanner, but there is no need to move the sensor during image acquisition to get a full hyperspectral data cube. The internal movement unit creates a 2D image in under 3 seconds. If needed there is also a line-scan mode, where the movement to create an image comes from the drone. These two modes can be switched directly on the remote controller. Camera control and power support works via DJIs Sky port 2.0 connector and the remote controller. Through the DJI Pilot App you get features such as remote camera trigger, RGB livestream and flight-planning support. To simplify the work even more, the first results from the camera can be viewed directly on the remote controller and, for example, the exposure can be checked. Data is stored on an external, removable USB-A data storage to minimise downtime during data transfer on the ground. Additional preprocessing on camera is possible, as the camera has a build in dedicated GPU.	HySpex Baldur S-640i N Baldur S-640i N covers the spectral range from 950-1730nm. All Baldur cameras are Nyquist cameras giving a spectral resolution of 2 spectral bands while capturing 4 times as much light as the classic systems. To ensure that the most information per framerate is provided, the spectral resolution is kept very close to 2 bands. Additionally, the spatial resolution of Baldur S-640i N is better than 1.5 pixels, yielding a very sharp camera.	Pika UV 330 - 800 nm Ultraviolet + Visible The Pika UV (formerly NUV2) is a hyperspectral camera that scans the Visible and Near Ultraviolet (VIS+NUV) spectral range. An optimized objective lens provides excellent imaging throughout the entire spectral range. Because halogen lights have low output in much of the NUV, Resonon offers an NUV lighting module to augment illumination for our desktop system. The Pika UV can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system.	Specim FX17 Specim FX17 hyperspectral camera operates in the near-infrared region and can literally see the invisible. It can reveal the targets? chemical composition, moisture, and foreign objects that are invisible to the human eye. Specim FX17 can, for example, detect different plastic types for recycling and measure the sugar level of fruits and vegetables and the moisture percentage of baked goods.	Fenix FENIX is optimized for the most demanding geological, law enforcement, and environmental applications. In a single continuous image, FENIX spectral camera delivers the best hyperspectral data ever seen over VNIR, NIR, and SWIR wavelengths. FENIX offers extreme ruggedness and 75% reduction in size and weight compared to previous multi-sensor systems. The excellence in technical performance and physical size has been achieved through innovative and unique ?single optics dual spectrograph? design.	HySpex Mjolnir V-1240 The HySpex Mjolnir V-1240 hyperspectral imaging system for UAVs provides a unique combination of small form factor and low mass, combined with high-performance specifications and scientific grade data quality. With a weight of less than 4 kg and less than 50 W power consumption, HySpex Mjolnir V-1240 is very well suited for a wide range of UAVs. The system is also compatible with several off-the-shelf gimbals. NEO offers high-performance unmanned aerial vehicles, fully integrated with the HySpex Mjolnir V-1240. The UAV is fitted with a standard battery package allowing up to 30 minutes of flight time. All HySpex Mjolnir systems can also be mounted on a tripod and rotation stage for ground use.
Description	Wavelength range = 500-1000 nm Number of bands = 100 Spectral resolution = 5 nm Spectral sampling = 5 nm Resolution RGB = 1800 x 1800 px Resolution Spectral = 540 x 540 px Field of View = HSI/RGB 33?/37? Detector = CMOS Sensor size = 2 Megapixel Radiometric resolution = 10 bit Integration time (cube) < 3 seconds Data size (raw) = 100 MB/ Data cube Connection = DJI Skyport 2.0 connector Operation temperature = -10 - +50?C Protection class = IP 40 Power consumption = 13.6 V DC / 2 A Size = 80 x 60 x 90 mm Data storage = 1 USB-A stick (supports 256 GB) Weight (incl. Gimbal) = 790 g	Spectral Range = 950 - 1730 nm Spectral bands = 232 Max speed* = 500 fps Spectral sampling = 3.36 nm Spectral FWHM <2 bands Spatial FWHM <1.5 pixels Spatial pixels = 640 Keystone <20% of a pixel Smile <20% of band FOV = 16? / 40? Bit resolution = 12 bit Noise floor = HG:8.5/MG:32/LG:270 e- Peak SNR = HG:150/MG:275/LG:800 Dynamic range = HG:2650/MG:2360/LG:2360 ROI* = All bands can be selected/deselected individually External trigger options = LVDS, 5V/12V/24V TTL Dimensions (l-w-h) = 364 - 105 - 153 mm Camera Interface = GigE * Reducing the number of spectral channels with ROI will proportionally increase the max framerate	Spectral Range (nm) = 330 - 800 Spectral Channels = 255 Spectral Bandwidth (nm) = 1.8 Spectral Resolution - FWHM (nm) = 2.8 Spatial Pixels = 1500 Max Frame Rate (fps) = 142 f/# = 2.8 InterfaceUSB = 3.0 Dimensions (mm) = 230 x 107 x 85 Weight, w/o lens (kg) = 2.27	Spectral Range = 900-1700 nm Spectral resolution (FWHM) = 8 nm (mean) Spectral sampling/pixel = 3.5 nm Spectral bands = 224 With default binning Numerical aperture = 1.7 With default lens Optics magnification = 0.80 Effective pixel size = 18.7 ?m At fore lens image plane Effective slit width Physical width = 42?m. Projection on sensor = 32 ?m (M=1.3) At fore lens image plane Effective slit length = 12.0 mm At fore lens image plane SNR @ max. signal = 1000:1 Bit depth = 12 Maximum frame rate = 670 (FX17)/ 527 (FX17e) FPS full range Binning = 1,2,4 spectral and spatial Default: 1 spectral x 1 spatial ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI and the total number of rows included in the mMROI?s. Pixel operability = 99.5%. Allowed clusters: Size 2-6 pixels: N/A/ Size 7-12 pixels: ? 6/ Size 13-19 pixels: ? 2/ Size 20-35 pixels: ? 1/ Size > 35: 0 Image corrections = Non uniformity correction/ Bad pixel replacement/ Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations Sensor material = InGaAs Sensor cooling = TEC Full well capacity = 1.44 Me- Read-out modes = IWR / ITR Optics temperature = Passive Default is 20 degrees Celsius Lens mount = Custom mount Fore lens FOV options = 12 deg/38 deg (default)/53 deg/66 deg/75 deg/90 deg. Only the default lens is specifically designed for FX17. With other lens options, optical parameters may vary. Camera digital data output/control interface = GigE Vision, CameraLink Camera control protocols = GenICam, ASCII Power input = 12 V DC (+-10%) Power consumption = Max 24 W Connectors = Industrial Ethernet OR CameraLink (standard MDR 26-pin). Power - Fischer 12pin DBPLU1031Z012\|130G IP = IP52 Dimensions (L x W x H) = 150 x 75 x 85 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight = 1.56 kg Storage temperature = -20 ... +50 oC (non-condensing) Operating temperature = +5 ... +40 oC (non-condensing) Relative humidity = 5% - 95% (non-condensing)		Spectral range = 400 - 1000 nm Spatial pixels = 1240 Spectral channels and sampling = 200 bands @ 3 nm F-number = F1.8 FOV = 20? Pixel FOV across/along = 0.27/0.27 mrad Bit resolution = 12 bit Noise floor = 2.3 e- Dynamic range = 4400 Peak SNR (at full resolution) > 180 Max speed (at full resolution) = 285 fps Power consumption = 50 W Dimensions (l-w-h) = 250 - 175 - 170 mm Weight < 4 kg *Includes IMU/GPS and DAU - <6.5 kg including standard battery