HAIP Solutions BlackBird V2 VNIR Sensor is the easiest way to take hyperspectral images on drones. It is specifically designed for the use with DJI drones from the Matrice 200 & 300 series. The worldwide first hyperspectral Plug and Play solution for drones. Ready to fly and measure. BlackBird V2 has two separate sensors. One HSI sensor and a separate RGB camera for high quality live stream on the remote controller. The hyperspectral sensor provides a native image resolution of 540×540 pixels with 100 spectral channels, continuously covering the wavelength range from 500 nm to1000 nm.
BlackBird is based on a hyperspectral line scanner, but there is no need to move the sensor during image acquisition to get a full hyperspectral data cube. The internal movement unit creates a 2D image in under 3 seconds. If needed there is also a line-scan mode, where the movement to create an image comes from the drone. These two modes can be switched directly on the remote controller. Camera control and power support works via DJIs Sky port 2.0 connector and the remote controller. Through the DJI Pilot App you get features such as remote camera trigger, RGB livestream and flight-planning support. To simplify the work even more, the first results from the camera can be viewed directly on the remote controller and, for example, the exposure can be checked. Data is stored on an external, removable USB-A data storage to minimise downtime during data transfer on the ground. Additional preprocessing on camera is possible, as the camera has a build in dedicated GPU.
Haip BlackBird V2 VNIR Sensor
VNIR Compare
Haip BlackBird V2 VNIR Sensor
Wavelength range = 500-1000 nm
Number of bands = 100
Spectral resolution = 5 nm
Spectral sampling = 5 nm
Resolution RGB = 1800 x 1800 px
Resolution Spectral = 540 x 540 px
Field of View = HSI/RGB 33?/37?
Detector = CMOS
Sensor size = 2 Megapixel
Radiometric resolution = 10 bit
Integration time (cube) < 3 seconds
Data size (raw) = 100 MB/ Data cube
Connection = DJI Skyport 2.0 connector
Operation temperature = -10 - +50?C
Protection class = IP 40
Power consumption = 13.6 V DC / 2 A
Size = 80 x 60 x 90 mm
Data storage = 1 USB-A stick (supports 256 GB)
Weight (incl. Gimbal) = 790 g
Quick Comparison
| Haip BlackBird V2 VNIR Sensor remove | Specim SWIR remove | Specim FX10+ remove | Resonon Pika L remove | Specim FX10 remove | HySpex VNIR-1800 remove | |
|---|---|---|---|---|---|---|
| Name | Haip BlackBird V2 VNIR Sensor remove | Specim SWIR remove | Specim FX10+ remove | Resonon Pika L remove | Specim FX10 remove | HySpex VNIR-1800 remove |
| Image |  |  |  |  | |  |
| Rating | ||||||
| Content | HAIP Solutions BlackBird V2 VNIR Sensor is the easiest way to take hyperspectral images on drones. It is specifically designed for the use with DJI drones from the Matrice 200 & 300 series. The worldwide first hyperspectral Plug and Play solution for drones. Ready to fly and measure. BlackBird V2 has two separate sensors. One HSI sensor and a separate RGB camera for high quality live stream on the remote controller. The hyperspectral sensor provides a native image resolution of 540x540 pixels with 100 spectral channels, continuously covering the wavelength range from 500 nm to1000 nm. BlackBird is based on a hyperspectral line scanner, but there is no need to move the sensor during image acquisition to get a full hyperspectral data cube. The internal movement unit creates a 2D image in under 3 seconds. If needed there is also a line-scan mode, where the movement to create an image comes from the drone. These two modes can be switched directly on the remote controller. Camera control and power support works via DJIs Sky port 2.0 connector and the remote controller. Through the DJI Pilot App you get features such as remote camera trigger, RGB livestream and flight-planning support. To simplify the work even more, the first results from the camera can be viewed directly on the remote controller and, for example, the exposure can be checked. Data is stored on an external, removable USB-A data storage to minimise downtime during data transfer on the ground. Additional preprocessing on camera is possible, as the camera has a build in dedicated GPU. | SWIR SWIR is a high-speed short-wave infrared hyperspectral camera that operates in the 1000-2500 nm range. It has 384 spatial pixels and achieves image rates of up to 400 frames per second using a CameraLink connection. To assure indoor/outdoor usage in varying conditions, it now has rugged weather-proof IP54 casing and temperature-stabilized optics but still uses less power than before, only 50W nominal. Its temperature-stabilized optics provide stability and sensitivity required in the most challenging near-infrared chemical imaging applications, from pharmaceutical quality assurance to food and agriculture analysis. The SWIR camera meets the highest requirements in the lab, industry, and field. | Specim FX10+ The Specim FX10+ is a high-speed line-scan hyperspectral camera optimized for applications requiring fast imaging. Its high resolution ensures accurate and detailed imaging at a rapid pace. Specim FX10+ operates in the visible and near-infrared (VNIR) region from 400 to 1000 nm. | Pika L 400 - 1000 nm Lightweight, Compact VNIR The Pika L is a lightweight, compact hyperspectral camera that covers the Visible + Near-Infrared (VNIR) spectral range. It is our most popular imager for remote sensing applications. The Pika L can be used in our airborne, laboratory, and outdoor hyperspectral systems, as well as standalone or integrated into your system. | Specim FX10 Specim FX10 is a line-scan hyperspectral camera that operates in the visible and near-infrared (VNIR) region. It is an excellent tool for industrial and scientific applications. The Specim FX10 operates in the 400-1000 nm region, and the color-optimized Specim FX10c in the 400-780 nm region. | HySpex VNIR-1800 The HySpex VNIR-1800 hyperspectral camera is developed for field, laboratory, and airborne applications. HySpex VNIR-1800 utilizes a cutting edge actively cooled and stabilized scientific CMOS detector. This makes VNIR-1800 the ideal camera for high-end data acquisitions where high radiometric accuracy is required. The dynamic range of 20 000 ensures outstanding SNR levels even in darker areas of an image of highly dynamic scenes. With a max frame rate of 260 fps, combined with aberration-corrected optics and high optical throughput (f/2.5), HySpex VNIR-1800 offers a unique combination of data quality, high speed, and sensitivity. A wide range of close-up lenses allows the use of the camera at working distances ranging from a few centimeters with a spatial resolution of 24 ?m to infinity e.g. airborne remote sensing. |
| Description | Wavelength range = 500-1000 nm Number of bands = 100 Spectral resolution = 5 nm Spectral sampling = 5 nm Resolution RGB = 1800 x 1800 px Resolution Spectral = 540 x 540 px Field of View = HSI/RGB 33?/37? Detector = CMOS Sensor size = 2 Megapixel Radiometric resolution = 10 bit Integration time (cube) < 3 seconds Data size (raw) = 100 MB/ Data cube Connection = DJI Skyport 2.0 connector Operation temperature = -10 - +50?C Protection class = IP 40 Power consumption = 13.6 V DC / 2 A Size = 80 x 60 x 90 mm Data storage = 1 USB-A stick (supports 256 GB) Weight (incl. Gimbal) = 790 g | Spectral range = 1000 - 2500 nm Spectral resolution (FWHM) = 12 nm (30 ?m slit) Spectral sampling / pixel = 5.6 nm F/# = F/2.0 Slit width = 30 ?m (50 or 80 ?m optional) Effective slit length = 9.2 mmRICAL CHARACTERISTICS Sensor = Cryogenically cooled MCT detector Spatial pixels = 384 Spectral bands = 288 Pixel size = 24 x 24 ?m Detector cooling = Stirling, 25 000 h MTTF Signal-to-noise ratio = 1050:1 (at max. signal level) Camera output = 16 bit CameraLink Data cable Length = 5m Camera control = USB/RS232 Frame grabber = NI-1433 Epix grabber = E4* Frame rate = 450 fps (maximum full frame) Exposure time range = 0.1 - 20 ms Power consumption = Nominal < 50 W Input voltage = 18 - 36 VNICAL CHARACTERISTICS Size (L x W x H) = Sensor 545 x 176 x 178 mm, PSU & control unit 300 x 190 x 130 mm Weight = 14 kg & approx. 5 kg Body = Anodized aluminium with mounting screwholes Lens mount = Standard C-mount Shutter = Electro-mechanicalONMENTAL CHARACTERISTICS Storage = -20... +50 ?C Operating = +5... +40 ?C non-condensing | Spectral Range = 400-1000 nm Spectral resolution (FWHM) = 15 nm, Typical mean Spectral sampling/pixel = 6.3 nm, With default binning Spectral bands = 100, With default binning Numerical aperture = 1.7, With default lens Optics magnification = 0.80 Effective pixel size = 19.9x9.97 ?m, At fore lens image plane Effective slit width = 42 ?m, At fore lens image plane Effective slit length = 10.2 mm, At fore lens image plane SNR @ max. signal = 420 : 1 Spatial samples = 1024 Bit depth = 12 Maximum frame rate = 705 FPS full range. With 2-spectral binning (Bands: Max FPS) = 1:9900/5:6500/20:2800/35:1813/70:985 Binning = 2,4,8 spectral and spatial, Default: 2 spectral x 1 spatial ROI = Freely selectable multiple bands of interest, Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI?s Pixel operability = 99.993% Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE). AIE: Unified spectral calibration + corrected smile and keystone aberrations. One point NUC Sensor material = CMOS Sensor cooling = Passive Full well capacity = 90 ke- Read-out modes = IWR / ITR Optics temperature = Passive Lens mount = Custom mount Fore lens FOV options:12 deg/38 deg (default)/47 deg/51 deg/83 deg. Only the default lens is specifically designed for FX10. With other lens options, optical parameters may vary. Camera digital data output/control interface = GigE Vision Camera control protocols = GenICam, ASCII Power input = 12 V DC (+-10%) Power consumption = Max 4 W Connectors = Industrial Ethernet IP = IP52 Dimensions (L x W x H) 150 x 85 x 71 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight 1.3 kg Storage temperature = -20 ... +50?C (non-condensing) Operating temperature = +5 ? +40?C (non-condensing) Relative humidity = 5% - 95% (non-condensing) | Spectral Range (nm) = 400 - 1000 Spectral Channels = 281 Spectral Bandwidth (nm) = 2.1 Spectral Resolution - FWHM (nm) = 3.3 Spatial Pixels = 900 Max Frame Rate (fps) = 249 f/# = 2.4 Interface = USB 3.0 Dimensions (mm) = 115 x 104 x 66 Weight, w/o lens (kg) = 0.64 | Spectral Range = 400-1000 / 400-780 (c-version) Spectral resolution (FWHM) = 5.5 nm (mean) Spectral sampling/pixel = 2.7 nm, With default binning Spectral bands = 224 / 140 (c-version), With default binning Numerical aperture = 1.7, With default lens Optics magnification = 0.80 Effective pixel size = 19.9x9.97 ?m, At fore lens image plane Effective slit width = 42 ?m, At fore lens image plane Effective slit length = 10.2 mm, At fore lens image plane SNR @ max. signal = 420 : 1 Spatial samples = 1024 Bit depth = 12 Maximum frame rate = 327 FPS full range / 514 FPS full range (c-version) Binning = 2,4,8 spectral and spatial Default: 2 spectral x 1 spatial ROI = Freely selectable multiple bands of interest. Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI?s Pixel operability = 99.993% Image corrections = Non uniformity correction/Bad pixel replacement/Automatic Image Enhancement (AIE)/One point NUC. AIE: Unified spectral calibration + corrected smile and keystone aberrations Sensor material = CMOS Sensor cooling = Passive Full well capacity = 90 ke- Read-out modes = IWR / ITR Optics temperature = Passive Lens mount = Custom mount Fore lens FOV options = 12 deg/ 38 deg (default)/ 47 deg/ 51 deg/ 83 deg. Only the default lens is specifically designed for FX10. With other lens options, optical parameters may vary. Camera digital data output/control interface = GigE Vision, CameraLink Camera control protocols = GenICam, ASCII Power input = 12 V DC (+-10%) Power consumption = Max 4 W Connectors = Industrial Ethernet OR CameraLink 26-pin, 0.5? MDR IP = IP52 Dimensions (L x W x H) = 150 x 85 x 71 mm Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. Weight = 1.3 kg Storage temperature = -20 ... +50?C (non-condensing) Operating temperature = +5 ? +40?C (non-condensing) Relative humidity = 5% - 95% (non-condensing) | Spectral range = 400 - 1000 nm Spatial pixels = 1800 Spectral channels = 186 Spectral sampling = 3.26 nm FOV* = 17? Pixel FOV across/along* = 0.16/0.32 mrad Bit resolution = 16 bit Noise floor = 2.4 e- Dynamic range = 20000 Peak SNR (at full resolution) > 255 Max speed (at full resolution) = 260 fps Power consumption = 30 W Dimensions (l-w-h) = 39 - 9.9 - 15 cm Weight = 5.0 kg Camera Interface = CameraLink *Can be doubled with FOV expander |
Leave a Reply